Manual Inventum IKI9035 (page 26 of 72) (English, German, Dutch, French)

790075

Zoom out

Zoom in

1/72

BUILDING-IN THE HOB

• Check that the kitchen unit and the opening conform to the requirements in respect of measurements and ventilation.

• Remove any wood shavings after the cutting work in the worktop opening and treat the cut edges of plastic or wooden

worktops with sealing varnish if necessary to prevent the worktop from swelling due to moisture.

• Lay the hob upside down on the worktop.

• Mount the plug to the connecting cable in accordance with the imposed requirements.

• Mount the supplied fastening brackets using the supplied screws in the induction hob.

• Turn the hob over and lay it in the opening.

• Adjust the bracket position to suit for different table top thickness.

Warning: Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after installation

(see picture).

• Connect the hob to the mains supply. The hob is now ready for use.

• Check the operation. If the induction hob is connected incorrectly, it will give a sound signal or show an error code

onthedisplays.

REMOVING THE HOB

Disconnect the appliance from the power supply. Remove the induction hob by applying pressure from below. Attention!

Take care not to damage the appliance! Do not try to remove the induction hob by trying to lift it out of the worktop

fromabove.

hob work top

fastening bracket

26 • English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKI9035 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8.26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum IKI9035 Manual

Product: