Manual Inventum IKI9035 (page 25 of 72) (English, German, Dutch, French)

790075

Zoom out

Zoom in

1/72

English • 25

38 38

500

CONNECTING THE INDUCTION HOB TO THE ELECTRICAL SYSTEM

• The induction hob is supplied with a connecting cable without plug and, according to wiring diagram A1,

hasastandard setting for 2 x 1 phase (230V AC). The induction hob uses a so-called 5-pole Perilix plug

(not included).

In the meter cupboard, the groups must each be protected with a 16 Ampere fuse at least.

• The induction hob can also be connected according to wiring diagram A2. This may only be performed

by arecognised installer. More instructions can be found in the enclosed instructions for the electrical

connection.

• The socket for connecting to the electrical system must be provided with an earthing pen and may

notbelocated above the induction hob. The socket for connecting to the electrical system must also

beaccessible for the user after placement of the induction hob.

• Before connecting the induction hob, check that:

- the fuse and electrical system are suitable for the load of the induction hob,

- the electrical system is equipped with an adequate earthing system that meets the applicable

standardsandregulations.

- the socket is easily accessible.

Intermediate support

connection block/connecting cable

A1 220-240V~ / 380-415V 2L/2N- 16A A2 220-240V~ - 32A

connection block/ connecting cable

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKI9035 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8.26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum IKI9035 Manual

Product: