663665

Inventum IKC6031 Manual

21
Zoom out
Zoom in
Previous page
1/32
Next page
SWITCHING A COOKING ZONE OFF
Select the cooking zone you want to switch off by pressing the corresponding key. Touch the - key to decrease the heat setting to [0].
By pressing the keys + and - simultaneously, the setting turns directly to [0].
If the cooking zone is hot, the displays shows an [H] instead of [0].
SWITCHING OFF ALL COOKING ZONES AT ONCE
To switch off all cooking zones at once, press the ON/OFF key. The displays which are still hot an [H] appears.
RESIDUAL HEAT DISPLAY
The residual heat display shows the glass is still too hot to touch around the cooking zone.
After switching off the cooking zone, the corresponding display shows [H]. As soon as the temperature has decreased enough the [H]
indication will disappear.
CHILD LOCK
The child lock prevents an unintentional use of the hob. After switching on the control, the child lock function can be activated.
Do not select a cooking zone. To activate the child lock, press simultaneously the + and - keys and then the + key again. [L] appears in
the displays and indicates the controls can’t be changed. If a cooking zone is still hot, [L] and [H] will be displayed in alternation.
The hob will remain locked until it gets unlocked, even if the control has been switched off and on.
To deactivate the child lock, first switch on the hob. Press simultaneously the + and - keys and then the - key again. [L] disappears in
the displays and the hob will be switched off.
KEY LOCK
The key lock function is for blocking and setting the hob in a save mode during use. Setting a higher heat setting or other alterations are
not possible. It is only possible to switch the appliance off.
The key lock is activated when the key lock key
is pressed for 2 seconds. This activation is confirmed by a sound signal. The
indicator for the key lock lights up and the controls are blocked. Press the key lock key
again to deactivate it.
TIMER FUNCTION
The timer function can be used in two ways: minute minder timer and cooking zone timer.
Minute minder timer
The minute minder timer can be operated without active cooking zones. Switch the hob on and press the TIMER key . The display
shows
. Set the desired time with the + and - keys. The range of the minute minder timer is between 0 to 99 minutes. If there are
no controls touched in 10 seconds, the minute minder time will be set and the dot will disappear. The time runs down according to the
setting.
When the time is over, a signal sounds and the timer display blinks. The sound signal will stop automatically by operating any key.
To change the timer, press the TIMER key
again and change the time with the + and - key.
Cooking zone timer
The cooking zone timer is connected to a cooking zone and can be set separately for each cooking zone. In contrast to the minute
minder timer the cooking zone timer switches off the cooking zone when the set time runs out.
• Switch on the hob and activate a cooking zone.
• Set the heat setting with the + and - key.
• Press on the TIMER key
. The display shows . The timer will now function as a minute minder timer.
• Press the TIMER key
again until the corresponding LED blinks to activate the cooking zone timer. Around the timer display there
a four LED’s. They indicate for which cooking zone, the cooking zone timer is set.
• Set the desired time with the + and - key.
• 10 seconds after the last control touch, the display will show the time of the cooking zone which runs out first (in case of
programming more than one cooking zone).
To set an extra cooking zone timer, do as follows:
• Press the TIMER key
again until the next corresponding LED blinks to activate the cooking zone timer. This also applies to the
other cooking zones.
• Set the heat setting with the + and - key.
• 10 seconds after the last control touch, the display will show the time of the cooking zone which runs out first (in case of
programming more than one cooking zone).
English • 21
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IKC6031 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKC6031 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info