663665
20
Zoom out
Zoom in
Previous page
1/32
Next page
before first use
3
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging
material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after unpacking for any
damage, possible from transportation. Clean the glass with a damp cloth. Check that the voltage in your home corresponds with the
voltage printed on the bottom of the appliance. Follow the installation instructions in chapter 7 for installing the hob.
operation of the appliance
4
After the mains voltage is applied all displays can light up for a moment. After that, the hob is in stand-by mode and is ready for use.
The hob is controlled with electronic sensors which are operated by touching the related keys. Each sensor activation is followed by a
sound signal.
SWITCHING THE APPLIANCE ON
Switch the hob on by touching the ON/OFF key for a few seconds. The displays of the cooking zones all show [0.] and the dots blink. If
there is no cooking zone selected within 10 seconds, the hob will automatically shut off.
SWITCHING THE APPLIANCE OFF
Switch the hob off at any time by touching the ON/OFF key for a few seconds.
The ON/OFF key always has priority in the switch off function.
SWITCHING ON A COOKING ZONE
Press on the key of the cooking zone you wish to use. There is a static dot indication on the selected cooking zone display and the dots
on the other displays turn off.
Place the pan on the cooking zone. Select the heat setting by using the increase heat setting key
or the decrease heat setting key
.
To get food quickly to the boil, select the desired heat setting and touch the P key to activate the Boost function.
BOOST FUNCTION
The Boost function gives extra power and can be activated for each cooking zone. A cooking zone must be selected and the heat
setting must be set with the
key and not with the + key. The Boost function is now automatically activated. The display of the
selected cooking zone shows an and the selected heat setting.
The duration of the Boost function depends on the selected heat setting of the corresponding cooking zone.
Setting + Boost Boost function automatically shuts off after Setting + Boost Boost function automatically shut off after
Setting 1 + A 1 minute Setting 6 + A 6 minutes
Setting 2 + A 2 minutes Setting 7 + A 7 minutes
Setting 3 + A 3 minutes Setting 8 + A 8 minutes
Setting 4 + A 4 minutes Setting 9 + A 9 minutes
Setting 5 + A 5 minutes - -
SWITCHING ON THE TRIPLE COOKING ZONE
Selecting a second or third cooking ring, is only possible when the related cooking zone is selected and the heat is set. The display
must show a dot next to the heat setting.
Press the
key to activate the second cooking ring. The indicator for the second ring lights up [ ]. Press the key again to
activate the third ring. The indicator for the third ring lights up [
]. To switch off the extra rings, press the key until the indicators
go out.
20 English
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IKC6031 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKC6031 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info