551639

Inventum HNL4212Z Manual

15
Zoom out
Zoom in
Previous page
1/32
Next page
CAUTION
• Please note that the electric blanket should not be dry-cleaned, wrung out, machinedried, pressed or ironed.
In case of heavier soiling, this electric blanket can be washed in a washing machine. Set the washing machine to a particularly gentle,
30°C cycle (woollens programme). Use a wool laundry detergent and follow the manufacturer’s instructions.
CAUTION
• Please note that excessive washing will wear out the electric blanket. For this reason, the electric blanket
should only be machine-washed a maximum of 5 times throughout its entire life.
Immediately after washing, reshape the electric underblanket to its original dimensions while it is still wet and spread it out flat over a
clothes horse to dry.
CAUTION
• Do not use pegs or similar items to attach the electric underblanket to the clothes horse. Otherwise, the electric
underblanket may be damaged.
Do not reconnect the controller to the electric underblanket until the plug-in connector and electric underblanket are completely dry.
Otherwise, the electric underblanket may be damaged.
storage
6
CAUTION
Please allow the electric underblanket to cool down first.
Otherwise, the electric underblanket may be damaged. To avoid
sharp folds in the electric underblanket, do not place any objects
on top of it while it is being stored.
If you are not going to use the electric blanket for some time, we recommend storing it in its original packaging
in a dry place without weighing it down. .
disposal
7
Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and
electronic equipment marked with the symbol indicating separate collection of such equipment must be returned to a
municipal waste collection point.
problems & solutions
8
Display Cause Action
The LEDs for the temperature settings 1, 3 and 5 blink. The controller is not fully
connected to the plug-in
connector of the electric
underblanket.
Connect the plug-in connector fully.
Set the ON/OFF switch to the OFF
(0) position for 5 seconds. Then set it
back to the ON (I) position.
The LEDs for the temperature settings 1, 3 and 5 still blink. The device is faulty. Send the complete transformer,
controller and electric
underblanket to the Service
Department.
No LEDs light up even though
- the mains plug is connected to a functioning socket
- the controller is fully connected to the electric
underblanket via the plug-in connector
- the ON/OFF switch is set to the ON (I) position.
The device is faulty. Send the complete transformer,
controller and electric
underblanket to the Service
Department.
English • 15
HNL4112Z-HNL4212Z-instructions.indd 15 27-8-2014 11:00:28
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum HNL4212Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum HNL4212Z in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info