551639

Inventum HNL4212Z Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
cleaning & maintenance
5
4.3 Switching on
Slide the on-/ off button (9) on the side of the controller (2) to position 1 ( I ), to switch the electric blanket on.
When it is switched on, the LED-indicator for temperature setting 1 lights up.
4.4 Setting the temperature
Press the button (7) to increase the temperature.
Press the button (8) to decrease the temperature.
Position 1: minimum warmth
Position 2-5: individual warmth
Position 6: maximum warmth
CAUTION
If the electric underblanket is being used over several hours, we
reccomend that you set the lowest temperature setting (1) on the
controller to avoid overheating the person using the blanket.
NOTE
• The foot area of this electric underblanket is heated to a greater temperature than the rest of the blanket.
• The fastest way to warm up the electric underblanket is to initially set the highest temperature setting.
• We strongly recommend switching on the electric underblanket approx. 30 minutes before going to bed and
covering it with the duvet in order to prevent heat loss.
4.5 Switching off
Slide the on-/ off button (9) at the side of the controller to position 0, to switch the electric blanket off.
Only the red LED on the transformer is then lit. When you remove the mains plug from the socket, the red LED on the transformer also
switches off.
INFO
If the electric underblanket is not being used for several days, slide the ON/OFF switch [9] to the OFF ( 0 ) position and remove the
mains plug from the socket.
4.6 Automatic switch off
This electric underblanket switches off automatically after 12 hours. Once the electric underblanket has switched off, it is no longer
heated and the LED for temperature setting 1 flashes.
To switch on the electric underblanket again, first set the ON/OFF switch on the side of the controller to the OFF ( 0 ) position for 5
seconds. Then set the ON/OFF switch back to ON ( I ) and select the desired temperature setting.
WARNING
Always disconnect the power plug from the socket outlet before cleaning the electric blanket. Otherwise,
this could cause an electric shock. Then remove the controller from the electric underblanket by
disconnecting the plug-in connector.
CAUTION
• The controller and the transformer must never come into contact with water or other liquids. Otherwise,
this could damage them.
To clean the controller and transformer, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
Small marks on the electric underblanket can be removed with a damp cloth or sponge, or if necessary, with a little liquid detergent for
delicate laundry.
14 • English
HNL4112Z-HNL4212Z-instructions.indd 14 27-8-2014 11:00:28
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum HNL4212Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum HNL4212Z in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info