694846

Inventum GF500HLD Manual

18
Zoom out
Zoom in
Previous page
1/44
Next page
The hot air fryer can be used to prepare a wide range of dishes.
1. Check that the voltage corresponds with what is stated on the information plate and insert the plug in an earthed socket.
The full display briefly lights up and the hot air fryer is in the standby position. The standby key lights up red.
2. Carefully remove the pan from the hot air fryer by its handle.
3. Place the ingredients in the basket. Caution: never exceed the recommended amount and never fill the basket above
themaximum, as the food could make contact with the heating element in that case.
4. Properly slide the pan back in the hot air fryer. Never use the pan without the basket. If the pan is not properly placed
inthehot air fryer, the appliance will not function.
Caution: do not touch the pan during and shortly after use, as it gets very hot. Only hold the pan by its handle.
5. Press the standby key to switch on the hot air fryer. The display shows the preset of 190°C and 3 minutes.
6. Select an automatic menu with the key and set the time ( 1 - 60 minutes ) and temperature ( 80 - 200°C ) yourself.
Tip: add 3 minutes to the cooking time when the hot air fryer is cold or use the automatic menu Preheating.
7. To switch on the hot air fryer, you then press the ON key .
• The display alternates between the set time and set temperature.
• The display shows the remaining time. Time and temperature can be adjusted during frying by pressing the or key.
During hot air frying, the fan symbol changes colour. Green means that the fryer has reached the required temperature.
• When the fan symbol is red, the hot air fryer is heating up.
• Excess oil dripping from the ingredients is collected in the pan.
8. Some ingredients must be shaken halfway the cooking time. Take the pan from the hot air fryer by its handle and place
itonaheat-resistant surface, such as a pan coaster. Press the release button of the handle and lift the basket from the pan.
Shakethecontents of the basket above the pan to prevent leaking and click back the basket in the pan.
Then slide back the pan in the hot air fryer to continue frying. Then press the ON key to continue the frying process.
9. As soon as the set time has elapsed, the hot air fryer will automatically switch to the standby position: The fan does continue
torun in order to allow the hot air fryer to cool down. After approximately 20 seconds, 5 beeps will sound and the fan symbol
isswitched off. Pull the pan from the hot air fryer by its handle and place it on a heat-resistant surface, such as a pan coaster.
Check that the ingredients are cooked.
hot air frying
4
AUTOMATIC MENUS
Press the menu key to select the following modes:
Menu Set
temperature in °C
Set time
in minutes
Preheating
200 3
French fries
200 22
Shrimps
160 8
Meat
200 25
Poultry
180 20
Fish
200 10
Steak
200 12
Cheese gratin
170 3
Bacon
200 10
The temperatures and times in the table are indications. Depending on size and weight, it may be necessary to adjust temperature and time.
It is possible to adjust the set temperature and time of the automatic menus. This is not possible when using the Preheating programme .
18 • English
GF500HLD-final instructions.indd 18 1-4-2019 10:47:54
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum GF500HLD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum GF500HLD in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info