694846

Inventum GF500HLD Manual

17
Zoom out
Zoom in
Previous page
1/44
Next page
English • 17
Before using the appliance for the first time, you should proceed as follows: carefully unpack the hot air fryer and remove all packaging
material and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of the reach of children. After unpacking
the appliance, check it for external damage that may have occurred during transport. Place the hot air fryer on a sturdy, flat and heat-
resistant surface.
The keys used to operate the hot air fryer are touch controls. Carefully touch the controls with a finger to activate. At each touch
ofatouch control, you can hear a sound signal.
STANDBY
As soon as you insert the plug in the socket, the hot air fryer is in the standby position. The standby key
lights up red.
In the following situations, the hot air fryer will automatically switch to the standby position:
• when you insert the plug in the socket
• if no key is touched for a period of 60 seconds
• when the set time has elapsed
• when you press the standby key for 3 seconds.
SWITCHING ON
/
OFF
Switch on the hot air fryer with the standby key
.
• The hot air fryer only functions if the basket has been placed in the pan correctly.
• As soon as the set time has elapsed, the hot air fryer will automatically switch to the standby position: The fan does continue torun
inorder to allow the hot air fryer to cool down. After approximately 20 seconds, 5 beeps will sound and the fan symbol is switched off.
BEFORE USING FOR THE FIRST TIME
Check that the voltage corresponds with what is stated on the information plate and insert the plug in an earthed socket.
The heating element is provided with a protective layer that must be removed prior to first use. This is done by setting the hot air fryer
to the maximum position for approximately 10 minutes without any food in the appliance. Light smoke may form due to the protective
layer burning off the heating element. Therefore, ensure proper ventilation in the room. After removing the protective layer you can
switch off the hot air fryer.
Remove the plug from the socket and clean the individual components before you actually start using the hot air fryer. Clean
thebasket, pan, grill rack and skewers with warm water, a mild washing-up liquid and a soft sponge. Tip: these components may also
be cleaned in the dishwasher.
Clean the interior and exterior of the appliance with a damp cloth.
This fryer works with hot air. Do not fill the pan with oil or frying fat.
• Place the hot air fryer on a heat-resistant flat surface.
• Properly place the basket in the pan.
• Place the pan in the hot air fryer.
CAUTION! Properly place the pan in the hot air fryer, otherwise it will not function.
Do not fill the pan with oil or other liquids.
Place nothing on top of the appliance.
Do not place anything over the air inlet openings. This will disrupt the air circulation and will have a negative effect
onthefrying result.
SETTING TEMPERATURE AND TIME
Use the
and keys to set the temperature and time. Press the
0
c
or key to change between temperature and time display.
The display automatically changes every 5 seconds if no key is used any more.
• The
0
c
key is only visible when the temperature is shown in the display.
• The key is only visible when the time is shown in the display.
prior to first use
3
GF500HLD-final instructions.indd 17 1-4-2019 10:47:52
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum GF500HLD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum GF500HLD in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info