686578
12
Zoom out
Zoom in
Previous page
1/34
Next page
344
NLA
S AVE THESE INSTRUCTIONS
(344NL) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 08/09/2019
English
Page 12
4. Press the button to turn on the control panel. Press the
button to in ate the spa tub wall for 8 to 10 minutes until it is rm to
the touch but not hard (see drawing 5 & 6).
IMPORTANT: Do not over in ate or use high pressure air
compressor to in ate.
5. Press the button again to turn it off.
6. Replace the air valve cap back.
The cap is designed to be screwed on and off. Never exert force
as this could cause the complete internal in ation system of the
valve to come loose. See “Spa Tub Air Valve Fastening” for valve
maintenance.
NOTE: If there is a need to replace the spa tub air pressure release
valve core (5) due to wear and tear, use the included wrench (22) to
unscrew the core from the valve base. Insert the replacement core and
tighten with the wrench. Make sure the core is securely tightened (see
drawing 7).
In ate the Spa Cover Air Bladder
1. Open the in ation valve and insert the in ation hose (7) into the
valve; press to in ate until it is rm to the touch but not hard (see
drawing 8).
2. Disconnect the in ation hose (7) from the air blower in ation outlet
and the valve.
3. Replace the control base in ation latch back; close and recess the
in ation valve.
NOTE: If there is a need to add some air to the spa tub wall
or spa cover air bladder after they have been setup, refer to above “In ate the Spa Tub Wall” and “In ate
the Spa Cover Air Bladder” sections. The cover air bladder is preinstalled inside the spa cover. If it needs to
be reinstalled, place the unin ated air bladder inside the spa cover lip before in ating the bladder.
SET UP (continued)
6
IMPORTANT: To prevent damage to the air
blower motor never block the air blower outlet
opening during in ation.
7
22
5
8
7
5
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex PureSpa - 28492 PS-BH-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex PureSpa - 28492 PS-BH-20 in the language / languages: English as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex PureSpa - 28492 PS-BH-20

Intex PureSpa - 28492 PS-BH-20 User Manual - German - 34 pages

Intex PureSpa - 28492 PS-BH-20 User Manual - Dutch - 25 pages

Intex PureSpa - 28492 PS-BH-20 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info