114
SAVE THESE INSTRUCTIONS Page 7
(114) ELECTRIC POOL HEATER ENGLISH 7.5” X 10.5” PANTONE 295U 12/18/2006
SSEETT--UUPP IINNSSTTRRUUCCTTIIOONNSS
OPERATING INSTRUCTIONS
1. Switch the knob clockwise to the
"I" position to turn the electric
pool heater on. See FIG. 3.
2. The red indicator light on the
heater top will light up indicating
heater is operating.
3. Run the heater to your desired
temperature.
4. Switch the knob counter-clockwise
to the "0" position to turn the
electric pool heater off. See FIG. 4.
NOTE: Turn off the heater before
turning off the filter pump or
entering the pool.
5. The red indicator light on the
heater top will turn off.
SPECIAL NOTES
• Always use a thermometer to test the pool water temperature before
entering or using the pool. If the themometer indicated water temperature
is over 95 degrees Fahrenheit (35 degrees Celsius), wait until the
indicated water temperature drops below 95 degrees Fahrenheit (35
degrees Celsius) before using the pool, or below 82 degrees Fahrenheit
(28 degrees Celsius) before operating the electric pool heater again.
IMPORTANT
NEVER use the pool if indicated water temperature is more than 95
degrees Fahrenheit (35 degrees Celsius).
Do not operate electric pool heater while the pool is in use or
occupied.
Fig (3)
Fig (4)
