686151
8
Zoom out
Zoom in
Previous page
1/29
Next page
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 8
The strainer grid prevents large objects from jamming and/or damaging the filter pump. If
your pool has an inflatable top ring, install the strainer, nozzle and plunger valve before
inflating the pool liner top ring. The part numbers here onward refer to the parts depicted in
the Parts List section of this manual. To install, do the following:
POOL OUTLET - STRAINER & PLUNGER VALVE SETUP (OPTIONAL)
1.
In a counter-clockwise motion unscrew plunger valve union
from the threaded strainer connector
(24)
(see drawing 1).
Be careful not to lose the step rubber washer
(21)
. Place the
plunger valve on the ground in a safe place.
2.
In a counter-clockwise motion unscrew the strainer nut
(22)
from the threaded connector
(24).
Leave the flat washer
(23)
on the connector
(24)
.
3.
Install the strainer and plunger valve at the lower position of
pool outlet (marked "+").
From the inside of the pool liner
insert the connector
(24)
into one of the pre-cut holes with
the washer remaining on the connector to be placed against
the inside of the liner wall.
4.
Before assembly, lubricate the threads with a petroleum
jelly. Then, with the flat side of the strainer nut
(22)
facing
the outside wall of the liner in a clockwise motion screw the
strainer nut
(22)
back onto the threaded connector
(24)
(see drawing 2)
.
5.
Finger tighten the strainer nut
(22)
onto the threaded
connector
(24)
.
6.
Grasptheplungervalveassembly.Makesurethestep
washer
(21)
is in place.
7.
In a clockwise motion screw the plunger valve union
back
onto the threaded connector
(24) (see drawing 3)
.
8.
In a clockwise motion turn the plunger valve handle to close
position. Ensure the plunger valve is securely closed.
This will prevent water from flowing out during filling of
the pool
(see drawing 4)
.
2
23
24
INSIDE
LINER WALL
22
1
2
1
3
1
2
4
INSIDE
LINER WALL
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex ECO7111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex ECO7111 in the language / languages: English as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info