686151
10
Zoom out
Zoom in
Previous page
1/29
Next page
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 10
SALTWATER SYSTEM/FILTER PUMP
Saltwater System/Filter Pump
1.
Remove the Saltwater System/Filter Pump and hoses from the packaging.
2.
Place the Saltwater System/Filter Pump in a location for hose
(8)
connections to the plunger
valve assemblies.
NOTE: Some regional regulations may require the filter pump to be mounted on a
stationary platform. There are two mounting holes located in the pump base for this
reason. Consult your local authorities for filter pump mounting requirements.
3.
Graspthetwopumphoses
(8)
and connect the hose nuts to the Saltwater System/Filter
Pump.
4.
In a counter-clockwise motion unscrew the threaded filter housing collar
(3)
from the filter
housing. Place it in a safe place.
5.
The Saltwater System/Filter Pump is an airtight system. In a counter-clockwise motion turn
both air release valves
(1 & 7)
1 - 2 turns to open.
DO NOT remove air release valves as
water will expel with force if the motor is turned on and injury may occur.
6.
Graspandremovethefilterhousingcover
(4)
. Check to see if a cartridge is inside the
housing. If yes, replace the cover, finger tighten the housing collar
(3)
back onto the filter
housing.
7.
Gentlyfingertightenthesedimentreleasevalvelocatedatthebottomofthehousingtobe
sure that water does not leak out.
8.
When the pool is filled connect the hose from the electrolytic cell outlet to the highest strainer
assembly. You will find the hose connection at the bottom of the plunger valve assembly. Use
the hose nut to attach the hose.
9.
Connect the second hose to the middle of the motor housing and to the remaining liner
connection.
IMPORTANT
To prevent air lock, open the lower plunger valve (connected inlet hose) first and
then the upper plunger valve (connected outlet hose). Open air release valves, lift
and lower the inlet hose until water starts to flow out of the air release valves, close
air release valves.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex ECO7111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex ECO7111 in the language / languages: English as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info