Manual Intex ECO 6110 (page 7 of 27) (English)

686155

Zoom out

Zoom in

1/27

(329PO) MODEL ECO5110&6110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/16/2017

329

SAVE THESE INSTRUCTIONS

English

Page 7

SETUP INSTRUCTIONS (continued)

. Go directly to step 2 if your pool is empty. If your above-ground-pool is filled with water,

unscrew the strainer grids from the strainer connectors and insert the black hat-like plugs

into the connectors, before installing the saltwater pool system.

. Connect the adaptor A

(1)

to the electrolytic cell

(3)

outlet as shown in Drawing #1. Tighten

securely.

. Disconnect the water return hose from the filter pump connection and connect it to the

adaptor A

(1)

on the Saltwater System with a hose clamp. (see Drawing #1)

. Connect adaptor B

(8)

to the connector hose

(7)

. Tighten securely. (see Drawing #1)

. Connect adaptor B

(8)

to filter pump outlet (lower connection). Tighten securely.

. Remove the black hat-like plugs that prevent water from flowing out of the pool. Now, return

the strainer grids to the strainer connectors.

Filter

Pump

I have ECO 6110 and keep getting error 91. Have too much salt 6.5 mpp but shows as low salt (that's how too much salt was put in)do I need a new eco electrode or titanium electrode. Or both or a new system? It is about 4years old Submitted on 26-5-2022 at 20:27
Reply Report abuse
Have model eco6100 the working and boost lights are on but no codes in red led box just a dot system will not shut off and no fault lights are shown what is the problem Submitted on 31-5-2021 at 02:34
Reply Report abuse
Yeah I have an Intex model eco6110 is there a sensor that tells how much salt there is the level and which one is it is it the ECO OR the titanium because I keep getting low salt codelite and the water is pretty salty help Submitted on 21-7-2020 at 04:12
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Intex ECO 6110 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Intex ECO 6110 Manual

Product: