752338
9
Zoom out
Zoom in
Previous page
1/14
Next page
(98IO) "ISO" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 03/28/2012
98A
SAVE THESE INSTRUCTIONS
Page 9
Fishing Rod Holder Use (Certain Models):
1. Slide the end cap over the end of the fishing rod.
2. Insert the fishing pole into the holder.
Seat Installation:
Certain Models:
1. Inflate each seat cushion slowly to about 75% of its capacity.
2. Attach the seat cushion hinge to the hinge on the boat. Repeat the
connection on the other side and for all seats. See Fig A.
3. Finish inflating the seat cushions slowly until it is firm to the touch
but NOT hard. DO NOT OVER INFLATE!
4. To disassemble the seats, deflate the seats first and reverse the
installation procedures.
NOTE: Some seat cushions after inflation are tuck in directly into
the fore, mid or aft locations of the boat cockpit. No hinges.
Mariner 3 / Mariner 4:
1.
Inflate each seat cushion slowly to about 75% of its capacity.
2.
Put the seat cushions into the fore, mid or aft locations of the boat cockpit.
3.
Finish inflating the seat cushions slowly until it is firm to the touch but NOT hard. DO NOT OVER
INFLATE!
4.
Seat cushions after inflation are tuck in directly into the fore, mid or aft locations of the boat cockpit.
5.
To disassemble the seats, deflate the seats first and reverse the installation procedures.
Oar Assembly:
1.
Insert “Shaft A” with the pin end first into the blade. Make sure the pin is securely fastened to the blade.
2.
Insert the assembled “Shaft A” through the oar-lock with the blade towards outboard (water).
3.
Place the retainer ring onto the other end of the assembled “Shaft A”, from inside of the boat.
4.
Join “Shaft A” with “Shaft B” together by inserting them together into the coupler and tighten the
coupler covers securely.
5.
When the oars are not in use secure the oars onto the oar holders located on each side of the boat.
Fig A
Pin
Coupler Cover
Shaft B
Coupler
Shaft A
Blade
Retainer Ring
Fishing
Rod
Holder
End Cap
Fishing
Rod
Coupler Cover
Shaft
Coupler
Blade
Retainer Ring
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex Challenger Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex Challenger Series in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex Challenger Series

Intex Challenger Series User Manual - German - 14 pages

Intex Challenger Series User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info