595723

Intermec CN3NI Windows Mobile 6.1 Manual

103
Zoom out
Zoom in
Previous page
1/148
Next page
Chapter 4 — Troubleshooting and Maintaining the CN3
CN3 Mobile Computer User’s Manual for Windows Mobile 6.1 91
Problems With Wireless Connectivity
Problem Solution
When you turn on the computer after it
was suspended for a while (10 to 15
minutes or longer), it can no longer
send or receive messages over the
network.
Host may have deactivated or lost current terminal
emulation session. In a TCP/IP direct connect network,
turn off the “Keep Alive” message from host to maintain
the TCP session while the computer is suspended.
The CN3 is connected to the network
and you move to a new site to collect
data. Your CN3 now shows you are not
connected to the network.
Move closer to an access point or to a different location
to reestablish communications until you reconnect with
the network. Any data collected while out of range is
transmitted over the network.
The CN3 appears to be connected to
the network, but you cannot establish a
terminal emulation session with the
host computer.
There may be a problem with the host computer, with
the connection between the server and the host
computer, or with the connection between the access
point and the host computer. Check with network
administrator to make sure the host is running and
allowing users to login to the system.
The CN3 appears to be connected to
the network, but the host computer is
not receiving any information from the
CN3.
In a TCP/IP network, there may be a problem with the
connection between the access point and the host
computer. Check with your network administrator or see
your access point user’s manual for troubleshooting
information.
Problems While Configuring 802.1x Security
Problem Solution
The CN3 indicates that it is
authenticated, but it does not
communicate with the host.
Make sure the CN3 IP address, host IP address, subnet
mask, and default router are configured for your
network.
The CN3 does not appear to be
authenticating and a network
connection icon does not appear on the
toolbar.
The CN3 may not be communicating with the access
point. Make sure the network name (SSID) on the CN3
matches the access point network name.
802.1x security network may not be active. Make sure the
server software is properly loaded and configured on the
server PC. See the server software documentation for
help.
… 103 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intermec CN3NI Windows Mobile 6.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intermec CN3NI Windows Mobile 6.1 in the language / languages: English as an attachment in your email.

The manual is 6,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info