778167
21
Zoom out
Zoom in
Previous page
1/32
Next page
800-grill.de | info@800-grill.de
21
9
Note:
If any one of the parts is missing or damaged, contact the retailer.
Note:
The gas hose must be replaced if it does not comply to national regulations.
Note:
Assemble the BBQ grill as shown.
DANGER!
Risk of cuts!
Metal parts may have sharp edges. Take care during assembly.
Unpacking
Unpack the unit and make sure all of the pieces are there.
Supplied as Standard
Scope of delivery
Assembly
Assembly
- Set up the product on a firm, level, and sufficiently robust surface.
Connecting the gas bottle
-Set all control knobs on the BBQ
grill body to OFF.
-Check whether the gas regulator (6)
on the gas bottle is closed.
Unscrew the safety cap from the threads of
the gas regulator (7).
-Check all seals for damage and to make sure they fit tightly; do not install any additional seals.
-Tighten cap nut (2) of the pressure regulator (3) anti-clockwise by hand on the connection valve of the gas
bottle (left-hand thread)
Leakage check
-Apply soap suds to cap nut (2) and connection thread (4) of the hose (5) and look for bubbleformation.
-Open the gas tank valve (6).
The connections are tight if no bubbles form.
-In the event of a leaky connection element, immediately close the gas tank valve (6) and replace the leaky
connection element.
Assembly
Set up the product on a firm, level, and sufficiently robust surface.
Connecting the gas bottle
• Stick the supplied button onto the designated pin on
top of the ignition.
• Set all control knobs on the BBQ grill body to OFF.
• Check whether the gas regulator (6) on the gas bottle is closed.
• Unscrew the safety cap from the threads of
the gas regulator (7).
• Check all seals for damage and to make sure they fit tightly; do not install any additional seals.
• Tighten cap nut (2) of the pressure regulator (3) anti-clockwise by hand on the connection valve of
the gas bottle (left-hand thread)
Leakage check
• Apply soap suds to cap nut (2) and connection thread (4) of the hose (5) and look for bubbleformation
• Open the gas tank valve (6).
• The connections are tight if no bubbles form.
• In the event of a leaky connection element, immediately close the gas tank valve (6) and replace
the leaky connection element.
NOTE!
Assemble the BBQ grill as shown.
DANGER!
Risk of cuts!
Metal parts may have sharp edges. Take care during assembly.
DANGER!
Risk of Explosion!
A leakage check with open flame is strictly forbidden!
Please strictly follow all safety information for handling gas!
During the leakage check, there may be no sources of ignition nearby. Do not smoke!
Porous or damaged hose lines and armatures must absolutely be replaced.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intergrill IG-800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intergrill IG-800 in the language / languages: English, German as an attachment in your email.

The manual is 11.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info