749950
59
Zoom out
Zoom in
Previous page
1/63
Next page
59
Troubleshooting
Problem Possible Reason Solution
Float valve
does not rise
Food debris on oat valve or
oat valve silicone cap.
Remove oat valve from lid and clean thoroughly.
Perform Initial Test Run to check for function. Record
ndings and contact Customer Care.
Too little liquid in the inner pot.
Check for scorching on bottom of inner pot.
Add 2 cups (16 oz / 500 mL) of a thin cooking liquid
to inner pot.
Float valve silicone cap
damaged or missing. Install silicone cap or replace oat valve entirely.
Float valve obstructed by lid-
locking mechanism
Tap oat valve with a long utensil. If the oat valve does
not drop, press Cancel and contact Customer Care.
No heat in the inner pot
Check for scorching on bottom of inner pot.
Add 2 cups (16 oz / 500 mL) of a thin cooking liquid
to inner pot.
Inner pot base may be
damaged
Perform Initial Test Run to check for function and
record ndings. Contact Customer Care.
Minor steam
leaking/hissing
from steam
release valve
during cook
cycle
Quick release button not in
Seal position
Flick quick release button to ensure it is in the Seal
position.
Cooker is regulating excess
pressure This is normal. No action required.
Steam gushes
from steam
release valve
when quick
release button
is in Seal
position
Not enough liquid in the inner pot Add 2 cups (16 oz / 500 mL) of a thin cooking liquid
to inner pot.
Pressure sensor control failure Contact Customer Care.
Steam release valve not
seated properly
Flick quick release button to ensure it is in the Seal
position.
Display remains
blank after
connecting the
power cord
Bad power connection or no
power
Inspect power cord for damage. If damage is
noticed, contact Customer Care.
Check outlet to ensure it is powered.
Cooker’s electrical fuse has
blown Contact Customer Care.
Occasional
clicking or light
cracking sound
The sound of power switching
and expanding pressure
board when changing
temperatures
This is normal; no action needed.
Bottom of the inner pot is wet
Wipe exterior surfaces of inner pot. Ensure heating
element is dry before inserting inner pot into cooker
base.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Instant Pot Duo Crisp - Air Fryer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Instant Pot Duo Crisp - Air Fryer in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info