738445
12
Zoom out
Zoom in
Previous page
1/36
Next page
Right Top Beam
Top Right Cable Column Mount
Step 7
2 - M10 x 100 Hex Bolts (Blue Dot)
2 - M10 x 110 Hex Bolts
6 - M10 Flat Washers
2 - M10 Locknuts Top Left Cable Column Mount
Step 8
2 - M10 x 100 Hex Bolts (Blue Dot)
2 - M10 x 110 Hex Bolts
6 - M10 Flat Washers
2 - M10 Locknuts
Step 9
1 - M12 x 25 Hex Bolt
1 - M10 x 45 Hex Bolt
2 - M10 Flat Washers
1 - M10 Locknut
Step7: Attach the Left Top Beam and Top Left Cable Column Mount Two (M10 x 100 Hex Bolts
to the left Main Uprights AND the Right Top Beam and Top with Blue Dot)
Right Cable Column Mount to the Right Main Uprights using: Two (M10 x 110 Hex Bolts)
Six (M10 Flat Washers)
(Finger Tighten Only) Two (M10 Locknuts)
Step 8: Attach the Top Weight Stack Mount to the Rear Main Two (M10 x 100 Hex Bolts
Uprights using: with Blue Dot)
Two (M10 x 110 Hex Bolts)
Six (M10 Flat Washers)
(Finger Tighten Only) Two (M10 Locknuts)
Step 9: Install the M12 x 25 hex bolt in the top of the One (M12 x 25 Hex Bolt)
Row Pulley Mount and adjust it to it’s minimum height. One (M10 x 45 Hex Bolt)
Attach the Top Weight Stack Mount to the Row Pulley Two (M10 Flat Washers)
Mount with the M10 x 45 hex bolt. Insert this bolt from One (M10 Locknuts)
front to go out the back, using:
(Wrench Tighten Steps 1 - 9)
Page 9
Left Top Beam
Top Weight
Stack Mount
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire SCS-202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire SCS-202 in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info