738445
13
Zoom out
Zoom in
Previous page
1/36
Next page
Lat Attach Bracket,
Upper and Lower
Lat Attachment
3 ½” Dia. Pulleys
Step 10
2 - M10 x 155 Hex Bolts
1 - M10 x 105 Hex Bolt
6 - M10 Flat Washers
3 - M10 Locknuts
Step 10: Assure the M12 Hex Bolt from STEP 9 is installed in the top of the Row Pulley Mount and
adjusted to the minimum height. Attach the Lat Attachment and two 3 ½” diameter pulleys to
the top of the Weight Stack Mount and Rear Cross Brace using:
Two (M10 x 155 Hex Bolts)
One (M10 x 105 Hex Bolt)
Six (M10 Flat Washers)
Three (M10 Locknuts)
2 - M10 x 60 Button Head Bolts
2 - M10 x 25 Hex Bolts
8 - M10 Flat Washers
4 – M10 Locknuts
Now install two Brackets supporting the Lat Attachment to Pull Up Cross Brace with the Button Head
Bolts, pointing up through the Pull Up Cross Brace. Use M10 x 60 Button Head Bolts with the locknut
on top of the Lat Attachment. Use the M10 x 25 Hex Bolts to secure the height adjustment of the
brackets together using: Two (M10 x 60 Button Head Bolts)
Two (M10 x 25 Hex Bolts)
Eight (M10 Flat Washers)
Four (M10 Locknuts)
(Wrench Tighten Now)
Note: Adjust the M12 x 25 Hex Bolt in the top of the Row Pulley Mount up
to support the load of the Lat Attachment.
Page 10
Rear Cross Brace
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire SCS-202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire SCS-202 in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info