738442
22
Zoom out
Zoom in
Previous page
1/32
Next page
STEP 15
A) Insert the Seat Stem Assembly (7) into the Seat Base Frame (4) as shown. Pull the pop pin out to
allow the seat to lower to a normal height. Then attach the Seat Base Assembly (35) to the Seat
Stem Assembly using the two M10*50 bolts (96) and two M10 Washers (86). Tighten these bolts
now but do not over tighten them or damage can occur. Now install the Orthopedic Pad (30) on
the Seat Base by working the edge of the pad into the groove of the Seat Base on all sides. Do not
use sharp objects during installation. Finally slide the Thigh Pads (37) onto the Seat Stem as
shown and secure with Velcro.
B) Install the Large Covered Foam Rollers (39) with the plastic inserts in them onto the lower arms of
the Leg Extension Assembly (15) as shown. Ensure that the Tube inserts are facing inwards.
Secure the Rollers with the Aluminum Endcaps (50) and the M10* Flat Head Screws (83). Tighten
the screws at this time with the 6# Allen Wrench supplied. Next install the other Large Covered
Foam Rollers (38) on to the upper arms of the Leg Extension Assembly by first sliding on the
plastic Spacer Tubes (49), large plastic Washers (69) and Rollers (38) on to the arms and secure
with the Aluminum End Caps (50) and M10 Flat Head Screws (83). Tighten the screws at this time
with the 6#Allen Wrench.
PAGE 19
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire M5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire M5 in the language / languages: English as an attachment in your email.

The manual is 8,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info