738442
21
Zoom out
Zoom in
Previous page
1/32
Next page
Pulley 25
Pulley 26
Pulley 27
Pulley 28
Lat Lower Cable
p/n 870-500-005
STEP 14
A) Install 4.5” Pulleys 25 and 28 (57) in the 3” round tube of the Main Frame as shown with
the 1” Step Spacers (46) and M10*95 bolts (97). Install Pulley 26 in the Floating Pulley
Plates with M10*45 bolt (94). Install Pulley 27 in the upper hole in the bracket on the
back side of the 3” round tube of the Main Frame with M10*45 bolt (94).
B) To route the Lat Lower Cable (44), first unwind it by stretching it out on the floor.
Assemble the cable end as in Step 12. This will help to keep the cable from following
through the gym as it is routed. Begin routing with the other end of the cable by running
it under Pulley 25, up and around the front of Pulley 26 in the Pulley Brackets, down to
the backside of Pulley 27 then under Pulley 28 and out like shown in the diagram.
C) Finish the last Cable Ends as Step as above.
Make sure that the hardware for Pulleys 25, 26, 27 and 28 are properly tightened.
PAGE 18
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire M5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire M5 in the language / languages: English as an attachment in your email.

The manual is 8,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info