738442
18
Zoom out
Zoom in
Previous page
1/32
Next page
Pulley 14
Pulley 15
Pulley 16
STEP 11
A) Insert the end of the Leg Extension Cable, from Step 10A, into the Floating Pulley Bracket
Assembly (20) as shown in the circle diagram, slide on the Cable Adapter (72), seat it in
the pulley bracket and install Pulley 14 with M10*45 bolt (94).
B) Now with Press Arm Middle Cable (42), take the end with the eyelet and bolt it to the Main
Frame with M10*25 bolt (108) and tighten the hardware now. Then route the cable under
Pulley 14 through the Floating Pulley Bracket and up the other side of the square post.
The Floating Pulley Bracket and Pulley 14 should now be positioned directly under the post
where the cable end is attached.
C) Attach Pulley 15 to the Floating Pulley Plates (28) with one M10*45 bolt and run the cable
over the top of the pulley and back down towards Pulley 16. At Pulley 16, you will first
need to finish the cable end as in Step A above and then install the pulley with one
M10*45 bolt.
PAGE 15
Floating Pulley
Bracket Assembly
has a plate on the
bottom
Cable Adapter
Press Arm Middle Cable
p/n 870-500-003
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire M5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire M5 in the language / languages: English as an attachment in your email.

The manual is 8,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info