738442
17
Zoom out
Zoom in
Previous page
1/32
Next page
Leg Extension
Cable
p/n 870-500-002
Pulley 11
Pulley 12
Pulley 13
The cable must go over
this plate or it will be
damaged.
Large ball end
STEP 10
A) Install Pulley 11 and 13 with the M10* 45 bolts (94) and Pulley 12 with the M10*95 bolt
(97) and two 1” Step Spacers (46) as shown in the drawing. Tighten the hardware at this
time.
B) On the Leg Extension Cam Assembly (48), remove the four flat head screws (109) and the
chrome Cam Plate (27). Next insert the large ball end of the cable into the recessed area
and reinstall the chrome Cam Plate with the four screws. Tighten the screws. Then feed
the other cable end between the two small pulleys (58), over the metal plate and down to
Pulley 11 as shown in the expanded drawing. Run the cable behind Pulley 11 then down
and under Pulley12 and then to the back of the gym. Be sure the cable goes between
Pulley 12 and the cable retainer rod welded inside the tube. You will finish routing it after
Step C.
C) Now insert the Leg Extension Cam Assembly (48) into the Leg Extension Assembly (15)
with the selector number 5 at the top. Now while holding them together, place them
between the two plates of the Seat Base Frame (4) and assemble using the M12*95 bolt
(98), flat washer (87), and thin locknut (89). Tighten this bolt but do not over tighten as
the Leg Extension must be able to rotate freely.
D) Now continue routing the cable by running it through the bottom of the Main Upright (2)
and under Pulley 13. You will finish with this cable in Step 10B.
PAGE 14
89
98
rev022812
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire M5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire M5 in the language / languages: English as an attachment in your email.

The manual is 8,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info