738441
18
Zoom out
Zoom in
Previous page
1/38
Next page
Step 16: Attach a 4 ½Pulley and 4 ½” Cover Plate to the base of the Main Upright as shown. Tighten Now.
Step 17: Use the Middle Cable with the hole in one eyelet end. Attach eyelet end with hole to the right side,
Top Beam Plate. Make sure a washer is on each side of the eyelet end as shown. Finger tighten only. Next,
route the cable down between Pulley 15 and the retainer pin, under Pulley 14 and up over Pulley 16 towards the
front and then down under the 4 ½” Pulley towards the back, then up and attach the end in the Adjustable
Floating Pulley Bracket (with Pulley 17) by taking one screw of the L retainer out and loosening the other screw,
tilting the L retainer and slipping cable end through the hole in the bottom of the bracket and securing with the
Cable Adapter back in the hole. Next replace L bracket and Tighten both Screws!! Set Pulley 17 Bracket aside
to be used in the next step.
Page 15
Pulley 14
Pulley 17
Installed on
the next step.
Note: If you purchased the
Leg Press Option, these
instructions position it on
the Right Hand side of the
machine. If you would like
it on the Left Hand side, go
to www.inspirefitness.net to
download the addendum.
The cable runs
between the pulley
and the metal pin.
4 ½” Cover Plate
4 ½” Pulley
Pulley 16
Pulley 15
Step 16
1 – M10 x 45 Hex Bolt
2 – M10 Flat Washers
1 – M10 Lock Nut
Step 17
1 – M10 x 155 Hex Bolt
3 – M10 Flat Washers
1 – M10 Lock Nut
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire M3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire M3 in the language / languages: English as an attachment in your email.

The manual is 9,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info