509747
13
Zoom out
Zoom in
Previous page
1/24
Next page
- 13 -
On this page you can see the software version of the LC-1 and you can change the multiplier to
calculate AFR from Lambda. A number of different multipliers are already pre-selectable but you
can change it to a custom one for the particular fuel you are using.
If you plan to use multiple LC-1’s, change the device name to something identifying which LC-1 is
connected where. For example LC1-Cyl1 for a LC1 connected to Cylinder 1. The device name
can be up to 8 characters long.
6.3 Resetting the calibration data
Press the Reset Calibration button if you want to reset all calibration data in the LC-1.
This will clear all calibration data of the LC-1.
6.4 Updating the Firmware
The LM Programmer Info/Set AFR tab reports the firmware version currently installed on your
unit. Do not update the firmware if the versions are the same. A firmware update should only be
necessary if there has been a new release.
Click the 'Update Firmware' in the main page to upgrade to the latest firmware for the LC-1.
Firmware for the LC-1 has the extension dld. New firmware releases are available on the
Innovate Motorsports’ web site (www.tuneyourengine.com) under ‘Support.’
If your computer crashes during a firmware upgrade, the LC-1 has a recovery mechanism where
it will be able to retry the download again and not be disabled by half loaded firmware. Switch the
LC-1 off and on again and then try to restart the LC1 Manager software. The recovery
mechanism is designed to be able to recover 99.9% of the time. While we don’t anticipate this
occurring, it is possible that the LC-1 will not recover correctly and may need to be serviced at
our factory. If you suspect this is the case, contact Innovate support.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innovate LC-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innovate LC-1 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info