800628

Innoliving INN-680 Manual

21
Zoom out
Zoom in
Previous page
1/24
Next page
21
escape. Then remove the cap by unscrewing it completely.
• Empty the boiler of any residual water. Pour the water only when the boiler is empty.
• Place a funnel on the lling opening and pour the water.
ATTENTION: Do not pour more than 500 cc (0.5 l.) of water. Never exceed this amount!
Remove the funnel.
• Replace the cap by turning it clockwise until it is screwed in completely.
UNPLUG THE IRONING SYSTEM
ATTENTION! The ironing system is turned off and safe only after carrying out the following operations:
Turn off the switch (1) for heating the boiler and the switch (2) for heating the iron.
Remove the plug from the wall socket and let the machine cool down.
CHOICE OF IRONING TEMPERATURE
• First, check whether the garment to be ironed has a label with ironing instructions.
• Always follow these instructions.
• Iron garments to which particular nishes have been applied (rufes, raised, shiny
applications, etc...) at lower temperatures.
• Select the items to be ironed according to the type of fabric: wool with wool, cotton with
cotton etc... The iron takes less time to heat up than it takes to cool down, consequently it
is advisable to start ironing the items that require a lower temperature, for example those
in synthetic bers.
• If the garment is made up of different types of fabric, always select the lowest temperature
that the type of ber requires (e.g. a garment made up of “60% polyester and 40% cotton”
must be ironed at the temperature indicated for polyester and without the use of steam).
• If you do not know the type of fabric the article is made of, carry out an ironing test on a
small hidden area of the garment and nd the most suitable temperature for that garment
(try starting from a low temperature).
• It is possible to press the iron on pure wool garments (100% wool) by setting it to the
“steam” position.
• It is advisable to set the steam knob to maximum and use a dry cloth for pressing.
• When steam ironing wool garments, the garment may have a shiny effect. This inconvenience
can be prevented by turning the garment inside out and ironing it on the inside. Velvet and
other fabrics that tend to have shiny spots should only be ironed in one direction (following
the direction of the pile) applying little pressure on the garment.
• Always keep the iron moving over the fabric, do not leave the iron stationary on the same
area of the fabric.
• Silk and other fabrics that become shiny easily should be ironed from the inside out.
GENERAL MAINTENANCE
ATTENTION! Before carrying out any maintenance or cleaning operation, remove the plug
from the socket and wait for the boiler to cool down adequately.
• Pour tap water into the boiler and rinse to remove any limescale residues. Repeat this
operation even after a long period of unuse to eliminate stagnant water.
• Empty the residual water from the boiler. The water remaining in the boiler can form
limescale deposits.
• Clean the body of the appliance with a damp cloth.
• Do not use solvents, they could damage the plastic parts of the appliance.
GB
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innoliving INN-680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innoliving INN-680 in the language / languages: English, Italian as an attachment in your email.

The manual is 1.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info