800598
39
Zoom out
Zoom in
Previous page
1/44
Next page
39
5.2 MODE OF OPERATION
The air conditioner has four operating modes: COOL, FAN, DRY, SLEEP.
A. COOL
- Select this mode to cool and lower the temperature in the room.
- Press the MODE button on the panel until the COOL indicator lights up.
- Press the UP / DOWN button to adjust the temperature displayed on the screen. The temperature can
be set between 16 ° C and 32 ° C.
- Press the SPEED button to set the desired fan speed.
- To control the airflow direction, manually adjust the wings.
Note: The air conditioner stops if the room temperature is lower than the selected temperature.
B. FAN
- Press the MODE button on the panel until the FAN indicator lights up.
- In this mode, the surrounding air is circulated, but it is not cooled.
- Press the SPEED button to set the desired fan speed.
C. DRY
- Press the MODE button on the control panel or remote control until the DRY indicator lights up. Fan speed cannot
be selected. The user must connect the hose to the drain outlet at the bottom of the unit.
Note: In this mode, the fan speed switches to low speed and cannot be changed.
D. SLEEP (this function can only be set with the remote control)
SLEEP mode can only be activated in COOL mode.
• In COOL mode:
After 1 hour the preset temperature is increased by 1 ° C, and after another hour the temperature will increase
again by 1 ° C.
5.3 TIMER SETTING (1 hour-24 hours):
The timer has two modes of operation:
To turn off
(When it’s working)
Push Timer to activate the timer function. Push Up/Down to set to turn off..
To turn on
(When it’s not working)
Push Timer to deactivate the timer function.. Push Up/Down to set to turn on.
Cancel the timer Push Up/Down until the display shows “00”.
Note: when you push POWER the timer gets deactivated.
5. 4 AUTOMATIC DEFROST
If the surrounding temperature is low during operation, frost may form in the air conditioner. The device will
automatically start defrosting and the POWER indicator will flash on the display. The defrost control phases are
as follows:
A. While the device works in COOL or DRY mode, the surrounding temperature sensor is able to detect if the
temperature of the device tube is below 1 ° C or if the refrigerant temperature reaches 7 ° C. Following one of
these two conditions, the compressor will stop for 10 minutes, and then restart in COOL mode.
B. While the device is working in DRY mode and once the tube temperature sensor detects that the device
temperature is below 40 ° C and the difference between the tube and room temperature is below 19 ° C, after
20 minutes of air conditioner operation, defrosting will start for 5 minutes and the power indicator will flash.
GB
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innoliving INN-520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innoliving INN-520 in the language / languages: English, Italian as an attachment in your email.

The manual is 2.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info