800598

Innoliving INN-520 Manual

33
Zoom out
Zoom in
Previous page
1/44
Next page
33
drained of refrigerant. The label must be dated and signed. Make sure there are labels
on the equipment indicating that the equipment contains flammable refrigerant.
11. DISPOSAL
When removing refrigerant from a system, for maintenance or decommissioning, it
is recommended that all refrigerants be used safely. When transferring refrigerant to
cylinders, ensure that only appropriate refrigerant recovery cylinders are used. Make
sure the correct number of cylinders are available to hold the total system charge.
All cylinders to be used are designated for the recovered refrigerant and labeled
for that refrigerant (i.e., special cylinders for recovering refrigerant). Cylinders must
be complete with safety valve and associated shut-off valves in good condition.
Empty recovery cylinders are evacuated and, if possible, cooled before recovery.
The decommissioning equipment must be in good operating condition with a set of
related instructions on hand suitable for the recovery of flammable refrigerants. In
addition, a set of calibrated scales must be available and in good condition. Pipes
must be complete with leak-free disconnect couplings and in good condition. Before
using the recovery machine, check that it is functioning satisfactorily, that it has
been properly maintained and that any associated electrical components are sealed
to prevent ignition if refrigerant is released. Consult the manufacturer if in doubt.
The recovered refrigerant must be returned to the refrigerant supplier in the correct
recovery cylinder and the relevant waste transfer note prepared. Do not mix the
refrigerants in the recovery units and especially not in the cylinders.
If you have to remove compressors or compressor oils, make sure they have been
evacuated to an acceptable level to ensure that flammable refrigerant does not
remain within the lubricant. The evacuation process must be performed before
returning the compressor to suppliers. Only electrical heating to the compressor body
should be employed to speed up this process. When oil is drained from a system,
insecurity must be performed.
GB
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innoliving INN-520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innoliving INN-520 in the language / languages: English, Italian as an attachment in your email.

The manual is 2.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info