Manual Inglesina Zippy Evo (page 30 of 100) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

769055

Zoom out

Zoom in

1/100

FEEDING BOTTLE HOLDING UNIT (IF AVAILABLE)

g. 21 Hook the feeding bottle holding unit (T9) to the

frame and make sure it is properly in its seat.

STORAGE BASKET

g. 22 The frame is equipped with a capacious storage

basket (T8). To secure it, insert all buttonholes in the proper

hooks and button up the rear strips.

ADDITIONAL TRANSPORT UNITS TO THE FRAME (CARRY

COT, TRANSPORT SEAT, AND INFANT CAR SEAT)

g. 23 The frame can be used together with carry cot,

transport seat, and Huggy infant car seat.

ZIPPY CARRY COT

HOOKING OF THE CARRY COT TO THE FRAME

Before hooking the carry cot, it is necessary to proceed as

follows:

g. 24 Remove the armrest covers (T3) if available,

by pressing with the index nger the hooking lever (F9)

positioned inside the armrest (F10).

g. 25 Insert the two stabilizing supports (T7) in the

openings (F11).

WARNING: the stabilizing supports have to be inserted

only when using the frame with the carry cot.

g. 26 By holding the carry cot by the handle, attach it to

the armrests (F10), positioning it exclusively facing mum.

g. 27 WARNING: make sure that the carry cot is always

properly attached on both sides of the frame before use.

UNHOOKING OF THE CARRY COT FROM THE FRAME

g. 28 Act on the lever (B1) positioned externally to the

carry cot.

g. 29 Simultaneously, lift the carry cot by holding it by

the handle.

HOOKING OF THE HOOD

g. 30 Hook the press studs on the carry cot structure.

g. 31 Wrap the hood (C2) around the handle fastening it

using the suitable press studs.

HANDLE AND HOOD ADJUSTMENT

g. 32 To adjust the handle and the hood act on the two

lateral button (B2) simultaneously.

g. 33 WARNING: to transport the carry cot, always

hold it by the handle.

HOOKING OF THE BLANKET

g. 34 Hook all buttons of the blanket to the carry cot.

MAINTENANCE OF THE INTERNAL LINING

g. 35 It is recommended to remove the internal lining

periodically to provide for its correct maintenance.

HUGGY INFANT CAR SEAT

HOOKING OF THE INFANT CAR SEAT TO THE FRAME

Before hooking the infant car seat to the frame, it is necessary

to proceed as follows:

g. 36 If present, remove the stabilizing supports (T7) by

acting on the proper push-buttons (F12).

WARNING: hold the supports during the ejection.

g. 37 Remove the armrest covers (T3) if available,

by pressing with the index nger the hooking lever (F9)

positioned inside the armrest (F10).

g. 38 By holding the infant car seat by the handle,

attach it to the frame on the armrests (F10), positioning it

exclusively facing mum.

g. 39 WARNING: make sure that the infant car seat is

always properly hooked before use.

UNHOOKING OF THE INFANT CAR SEAT FROM THE

FRAME

g. 40 Act on the lever (U1) positioned on the rear side of

the infant car seat.

g. 41 Simultaneously, lift the infant car seat by holding it

by the handle.

To use the Huggy infant car seat properly, refer to the

dedicated manual.

TRANSPORT SEAT

HOOKING OF THE TRANSPORT SEAT TO THE FRAME

Before hooking the transport seat to the frame:

g. 42 If present, remove the stabilizing supports (T7) by

acting on the proper push-buttons (F12).

WARNING: hold the supports during the ejection.

g. 43 Insert the armrest covers (T3) in the proper seats.

WARNING: when placing the baby, make always sure that

the armrest covers are properly tted in their seats.

g. 44 The transport seat is reversible; therefore, it can be

hooked to the frame facing mum or the street.

g. 45 Hook the transport seat to the frame positioning

it in the proper seats on both sides, following the graphical

references available on the structure.

g. 46 WARNING: make sure that the transport seat is

always properly hooked on both sides before use.

UNHOOKING OF THE TRANSPORT SEAT FROM THE FRAME

g. 47 Press the lever (S1) and lift one side of the transport

seat by moving it slightly inwards. Repeat this procedure on

the opposite side, removing it completely.

WARNING: never perform this procedure with baby on

board.

ADJUSTMENT OF THE BACKREST

g. 48 It is possible to adjust the backrest to 4 positions;

act on the central device (S2) and bring the backrest to the

wished position.

USE OF THE BUMPER BAR

TRANSPORT SEAT FACING MUM

g. 49 When the transport seat is facing mum, use the

small handrail (R1) together with its covering.

g. 50 To hook it, press the levers (S3).

g. 51 Insert the ends of the handrail in their proper seats

(S4) on the transport seat.

g. 52 The handrail can be opened on one side or

completely removed. To open it, press the lever (S3) and

extract it; to remove it, repeat the procedure also on the

other side.

TRANSPORT SEAT FACING THE STREET

g. 53 When the transport seat is facing the street, use the

big handrail (T4) together with its covering.

g. 54 To hook it, insert the ends in the openings on the

armrests and press them until they block.

g. 55 The handrail can be opened on one side or

completely removed. To open it, press the red lever (S3)

present under the armrest (F10); to remove it, repeat the

procedure also on the other side.

WARNING: do not insert the ngers in the openings on

the armrests when performing these procedures.

INSTRUCTIONS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inglesina Zippy Evo in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 6,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inglesina Zippy Evo Manual

Product: