Manual Inglesina Trilogy (page 27 of 136) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

768074

Zoom out

Zoom in

1/136

LIST OF COMPONENTS

g. 1

Chassis

T1 Front wheel assembly

T2 Std Trilogy rear wheel assemblies

T3 City Trilogy rear wheel assemblies

T4 Feeding bottle holder

T5 Storage basket

Transport Seat

R1 Handrail

R2 Pushchair seat hood

R3 Mu (if available)

R4 Rain cover (if available)

Carrycot

C1 Carrycot hood

C2 Carrycot apron

Infant Car Seat (if available)

CHASSIS

ASSEMBLY /REMOVAL OF REAR WHEEL ASSEMBLY

g. 2 Insert the wheel assembly in correspondence of

the rear tube

g. 3 Attach the ring (T6) to the bracket (T7), and press

the lever (T8) until it is fully attached, making sure that the

ring (T6) is properly positioned in its housing.

CAUTION: make sure that the wheels are properly

attached before use.

g. 4 To remove the rear wheel assembly, lift the lever

(T8) and unhook the ring (T6) from the bracket (T7), until it is

completely free.

OPENING THE CHASSIS

g. 5 Keeping pressed the lever (T9) positioned on the

right handle, rmly lift the frame until it is completely open.

g. 6 Complete the procedure by pushing on the pedal

control (T10) until it is locked in horizontal position.

g. 7 CAUTION: make sure that all closing

mechanisms are properly attached on both sides before

use.

CLOSING THE CHASSIS

g. 8 Press the button (T11) and lift the rear handle

(T12).

g. 9 Firmly pull the rear handle (T12) upwards until the

chassis is completely folded

REAR WHEELS BRAKE

g. 10 To engage the brake, push down the lever (T13)

positioned on the right rear wheel assembly

Always engage the brake during stops.

CARRY HANDLE

g. 11 To transport the folded chassis, use the handle

(T14). Do not lift the chassis by the opening handle (T12).

BLOCKING/UNBLOCKING THE FRONT WHEELS

g. 12 The chassis is equipped with swivel wheels, which

can be blocked/unblocked by means of the lever (T15)

located in correspondence of the central joint.

REMOVING THE FRONT WHEELS

g. 13 If necessary, the front wheels can be easily

removed. To do so, push the lever (T16) forwards, as shown

in the gure and, simultaneously, remove the wheel.

g. 14 To reattach the wheels, insert them in

correspondence of the opening (T17) and push until it clicks

into place.

CAUTION: make sure that the wheels are properly

attached before use.

REAR PLATFORM

g. 15 Adjust the rear platform (T10) with your foot to

cross obstacles.

FEEDING BOTTLE HOLDER

g. 16 The chassis is equipped with a standard feeding

bottle holder (T4).

To fasten the feeding bottle holder, place the upper guide in

correspondence of the hook (T18) on the chassis and push it

in its housing until it is fully attached.

STORAGE BASKET

g. 17 The chassis is equipped with a capacious storage

basket (T5). To secure it, insert the eyelets (B1) onto the rear

hooks (T19) on the chassis.

Let the ns (B2) pass through the eyelets (T20) on the

side of the frame and fasten the corresponding press

studs.

Finally, insert the eyelets (B3) onto the front hooks (T21) on

the chassis

ADDITIONAL TRANSPORT UNITS (CARRYCOT, INFANT

CAR SEAT (if available), PUSHCHAIR SEAT )

g. 18 The chassis can be used with the Trilogy carrycot,

the pushchair seat and the Huggy car seat (if available).

TRILOGY CARRYCOT

AT TAC HING THE CARRYCOT TO THE CHASSIS

g. 19 Take the carrycot from the handle and attach it to

the chassis in correspondence of the housings on both sides

of the structure and place it solely in rear facing position.

g. 20 CAUTION: make sure that the carrycot is

properly attached before use.

DETACHING THE CARRYCOT FROM THE CHASSIS

g. 21 Use the lever (C3) on the outside of the carrycot.

g. 22 Simultaneously, lift the carrycot by holding it by the

handle.

AT TAC HING THE HOOD

g. 23 Fasten the press studs to the carrycot structure.

g. 24 Wrap the hood (C1) around the handle, fastening it

by means of the press studs.

HANDLE AND HOOD ADJUSTMENT

g. 25 To adjust the handle and the hood, press the two

buttons on the sides (C4) simultaneously.

g. 26 CAUTION: to transport the carrycot, always hold

it by the handle.

HOOD VENTILATION (IF AVAILABLE)

g. 27 The hood is equipped with a mesh netting that

allows for proper ventilation inside the carrycot.

AT TAC HING THE APRON

g. 28 Fasten all the apron buttons to the carrycot.

INTERNAL VENTILATION

g. 29 Internal ventilation can be adjusted by means of

the lever (C5).

BACKREST ADJUSTMENT

g. 30 Operate the lever (C6) to adjust the backrest: once the

desired position is reached, set the lever to the starting position.

MAT T RESS AND INTERNAL LINING

MAINTENANCE

g. 31 It is advisable to remove the mattress and internal

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inglesina Trilogy in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 9,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inglesina Trilogy Manual

Product: