513179
6
Zoom out
Zoom in
Previous page
1/52
Next page
How to use your dryer
1. Plug in, switch
on electricity.
2. Sort your laundry
(see section “Sorting
Your Laundry”)
3. Open the door
by pressing and
releasing the front
panel in the position
shown.
4. Always check
the following:
5. Load the dryer
placing the
clothes carefully in
the drum pushing
them well towards
the back and
away from the
door seal. Close
the door.
6. Press the Power
Switch ‘IN’.
7. Select the
required programme
or drying time. (see
section “The
Controls”)
8. Press the START
switch to commence
the drying
programme.
9. When finished
open the door and
take out the
laundry. Clean and
replace the fluff
filter.
10.Switch off
electricity and
remove plug from
socket.
WARNING: WHEN
SWITCHING ON
OR OFF, PLEASE
ENSURE THAT
YOUR HANDS
ARE DRY
WARNING: WHEN
SWITCHING ON
OR OFF, PLEASE
ENSURE THAT
YOUR HANDS
ARE DRY
FLUFF FILTER
is clean and in place
Removing Items
By opening the door you can check the dryness of the load as often
as you wish and if you want, remove some items before they are
fully dry. (This is particularly useful for a mixed load where you want
to iron some items, but others are to be fully dried.) You will need
to press the start button after closing the door to re-start the
programme. See section ‘The Controls’.
The Controls
Programme ControlStart Switch
Power Switch Active Light
To set the programme, all you have to do is turn the Programme
Control knob until the required selection appears in line with the
indicator.
Automatic programmes (for load sizes more than 1kg)
1. Dry Cottons ( HIGH heat) This gives driest results.
Some bulky items or large load of towels
may appear slightly damp after this
programme and require a short period of
timed drying.
2. Damp Cottons ( HIGH heat)
3. Iron Dry Cottons ( HIGH heat)
This gives the wettest results.
4. Dry Synthetics ( LOW heat)
5. Damp Synthetics ( LOW heat)
6. Iron Dry Synthetics ( LOW heat)
Timed programmes (for load sizes less than 1kg)
7. 40 minutes ( LOW heat) include cool tumble followed by the
Crease Care phase.
8. 30 minutes ( LOW heat) include cool tumble followed by the
Crease Care phase.
9. 20 minutes ( LOW heat) include cool tumble followed by the
Crease Care phase.
10. Airing, 20 minutes of cool tumble.
11. Easy Iron Programme, see section"Easy Iron Programme".
For description of other programmes see next page.
Press and release the START button to commence a drying
programme (The drying programme must have been selected first).
The Active Light will then glow.
Press the button IN to turn the dryer on.
The dryer will not operate unless the power button is IN.
Setting the
Programme
Programme
Options
Starting the Dryer
Power Switch
NOTE: If the door is opened during a programme, the Dryer will
automatically stop. To continue the programme, after closing the
door, the START button must be pressed.
5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Indesit G 84 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Indesit G 84 V in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info