34689
16
Zoom out
Zoom in
Previous page
1/29
Next page
mod.AD10EU page 16
Code 058062 - Control board with green sticker;
AD12UK
Code 061941 - Control board with red sticker; (Only with the new software 2.12);
AD8EU
AD7IT
In order to facilitate the identification of the new boards, the microprocessor has been provided with a label with the software
version (2.12).
n1040041: Door seals
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
On some of the Washing-Machine models manufactured at the Comunanza factory, the following door seals have been used:
Serial no. 90614.0001 the door seal part no. 065006;
Serial no. 90621.0001 the door seal part no. 065005.
The new door seals for the models concerned by this information are interchangeable with the pre-modification ones, but not vice-
versa.
The door seal part no. 056743 will continue to be handled normally, as it is used on other models being produced, whereas part
no. 019722 is being discontinued and replaced by part no. 065005 door seal.
n1040047: Modification to the swivel drawer
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Beginning with serial no. 90901.0001 on all washing machines in the following ranges: Dialogic AD, Supermargherita AL - LA -
AB - BA- ALS - LAS - ABS - BAS, and other EWA, S, A, CD, ML.S, WDS, SG, LB, WMS, MLT and MLTI, the swivel drawer
was modified.
The modified drawer keeps the same SAT code (part no. 046148); if it is used on pre-modification appliances, part of the internal
rib on the handle has to be removed, as indicated in the figure below.
If the control panel plus handle have to replaced, verify whether this has to be done or not by checking the serial no. and handle
used.
A - To assemble the new drawer, remove the highlighted area of the rib (with the aid of a cutter or a file) from the pre-
modification handles.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Indesit AD10EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Indesit AD10EU in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info