Manual Indesit AD10EU (page 15 of 29) (English)

34689

Zoom out

Zoom in

1/29

mod.AD10EU page 15

interchangeability, they are handled assembled with rear panel and terminal block.

This modification also applies to cabinets which are no longer produced but still handled as spares. Therefore, in cases where the

cabinet is modified, it is necessary to use rear cover cod. 049515 and terminal block cod. 041163.

n1040015: Top depth reduction

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Top depth was reduced in Super-Margherita and Giugiaro washing machines, with serial number 81012.0001 and 81022.0001,

respectively.

The new tops are interchangeable with the pre-modification ones and the SAT codes 046139 (530 mm depth) for Super-

Margherita and 044821 (530 mm depth) for Giugiaro remain unchanged (Historical consumption requirement).

Due to the presence of large stocks, the pre-modification tops 061931 Super-Margherita (540 mm depth) and 061932 (544 mm

depth) Giugiaro were re-coded.

n1040019: Error signalling from control board

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

From serial number 90101.0001 to 90415.0001, the control boards of Dialogic, AD10IT, AD10EU, AD12EU and AD12BE

washing machines can signal the F03 error code. In standard conditions, the code is associated with a defect of the temperature

probe. In the above-mentioned machined (and only in them) the code is associated with the control board that must be replaced.

n1040032: New Dialogic control board software (2.12)

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Beginning from serial number 90531.0001 the new software 2.12. has been introduced in the control board (white sticker) code

057723 used in the Dialogic AD10IT washing machine in replacement of the old software 2.01.

The boards with software 2.12 can be used on the premodification appliances and are handled with the same SAT code. The

boards with software 2.01 can only be used until the arrival of the new boards.

All the control boards used in the Dialogic production will be provided with the new software by June.

Code 057723 - Control board with white sticker;

AD10IT

AD10EU

AD10SKD

Code 057722 - Control board with blue sticker;

AD10UK

Code 057701 - Control board with yellow sticker;

AD12EU

AD12BE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Indesit AD10EU in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Indesit AD10EU Manual

Product: