Manual Imperial BML5.64-2 UT (page 48 of 84) (English)

551480

Zoom out

Zoom in

1/84

Once you have entered both an oven

and core temperature

–

the oven will start heating up.

–

the actual core temperature will

then appear in the oven display, N.B.

The lowest temperature that can be

displayed is 20°C, so this will also be

shown until the roast probe registers

a temperature higher than 20°C.

As soon as the core temperature

selected has been reached

– an audible tone sounds for approx.

3 seconds.

– the e symbol and the core

temperature will flash in the display.

– the cooling fan will continue running

until the temperature in the oven has

fallen sufficiently.

Both the audible tone and the flashing

symbol can be cancelled by turning the

function selector to the "0" position.

If the audible tone is not switched off it

will continue to sound at 5 minute

intervals as a reminder that cooking

time has finished. This reminder

continues for up to an hour.

Important notes:

The clock / timer function can be used

to delay the start of the cooking

process.

To do this enter the required

temperatures and then call up the f

symbol in the clock / timer display and

set the required start time.

When finished, cover the meat with

aluminium foil and allow to stand for

approx. 10 minutes. During this time the

core temperature rises another

5 – 10°C.

If the temperature probe is left in the

food at the end of the cooking process,

the oven display will show the core

temperature first rising and then

sinking.

You may need to insert the probe in a

different place and start again:

– if the cut of meat was too large (3 kg

or more) for the probe to be inserted

right to the centre.

–

if the meat is not sufficiently roasted

when the set temperature is reached.

The time taken to roast meat by

temperature using the probe is similar

to that when cooking by time.

Roasting with the Roast Probe

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Imperial BML5.64-2 UT in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Imperial BML5.64-2 UT Manual

Product: