749796
14
Zoom out
Zoom in
Previous page
1/68
Next page
Clock function Application
MINUTE
MINDER
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
00:00
COUNT UP
TIMER
If you do not set any oth-
er clock function the
COUNT UP TIMER auto-
matically monitor how
long the oven works.
The counting starts imme-
diately when the oven
starts to heat.
The Count Up Timer can-
not be used with the func-
tions: DURATION, END.
Setting and changing the time
After the first connection to the mains, wait
until the display shows and "12:00".
"12" flashes.
1. Turn the control knob to set the hours.
2. Press to confirm and set the minutes.
The display shows and the set hour.
"00" flashes.
3. Turn the control knob to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press again
and again until the indicator for the time of
day flashes in the display.
Setting the DURATION function
1. Set a heating function. Press to
confirm.
2. Press again and again until
starts to flash.
3. Turn the control knob to set the minutes
and press to confirm. Turn the control
knob to set the hours and press to
confirm.
When the set Duration time ends the signal
sounds for 2 minutes. and time setting
flash in the display. The oven turns off
automatically.
4. Press any button to stop the signal.
5. Turn the knob for the heating functions
to the off position.
This function is not available for some oven
functions.
Setting the END function
1. Set a heating function. Press to
confirm.
2. Press again and again until starts
to flash.
3. Turn the control knob to set the hours
and press to confirm. Turn the control
knob to set the minutes and press to
confirm.
At the set End time the signal sounds for 2
minutes. and time setting flash in the
display. The oven turns off automatically.
4. Press any button to stop the signal.
5. Turn the knob for the heating functions
to the off position.
This function is not available for some oven
functions.
Setting the TIME DELAY function
1. Set a heating function. Press to
confirm.
2. Press again and again until
starts to flash.
ENGLISH 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ikea Smaksak 904.117.28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ikea Smaksak 904.117.28 in the language / languages: English, German as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ikea Smaksak 904.117.28

Ikea Smaksak 904.117.28 Manual - German - 16 pages

Ikea Smaksak 904.117.28 Manual - Dutch - 16 pages

Ikea Smaksak 904.117.28 User Manual - Dutch - 72 pages

Ikea Smaksak 904.117.28 Installation Guide - All languages - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info