311705
9
Zoom out
Zoom in
Previous page
1/17
Next page
GB 9
DRAINING RESIDUAL WATER
CARE AND MAINTENANCE
When should I drain residual water (draining problem)?
Before transporting (moving) the machine.
If the washing machine is installed in a room subject to sub-
zero temperatures. It is best in this case to drain the machine
after every wash.
1.
Stop the washing machine and unplug it.
2.
Turn off the tap, disconnect the water supply hose from the
machine and allow the water to drain into a basin.
3.
Open the foreign body trap, let the water drain into a small
shallow basin and close the trap.
4.
Release the drain hose then open the fixing clip located at the
rear of the machine (see arrow A).
5.
Let the residual water flow into a shallow basin.
6.
Wait until the flow stops.
7.
Fix the drain hose again with the clip and replace it with the U-
bend.
8.
Reconnect the water supply hose and the power plug.
Important:
After draining the residual water, screw on the machine’s
water supply hose by hand. Check water-tightness of washing
machine connections by turning the tap completely on.
Detergent dispenser
1.
Push in the buttons on each side of the dispenser.
2.
Pull the dispenser towards you and remove.
A small quantity of water can remain in the dispenser. It is
advisable to carry the dispenser in an upright position.
3.
Wash the dispenser using running water.
You can also remove the siphon caps in the dispenser for
cleaning.
4.
Replace the siphon caps in the dispenser (if removed).
Make sure that they lock in place.
5.
Replace the dispenser by locating the bottom tabs in the lid
holes and pivot until both of the upper buttons lock.
Note: ensure that the detergent dispenser is correctly
reinstalled.
A
IFU_Alpha_Sc1-mech_GB.fm Page 9 Wednesday, March 30, 2005 6:52 PM
Black process 45.0° 100.0 LPI
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis awv 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis awv 810 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis awv 810

Ignis awv 810 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info