311705
7
Zoom out
Zoom in
Previous page
1/17
Next page
GB 7
PROGRAMME SELECTION
Preparation of wash cycle
1.
Load the machine, close the drum flaps and check that they are properly locked.
2.
Add detergents and additives into the dispenser to no more than the
“MAX”
level mark. Please refer
to “Detergents and additives”.
3.
Turn the
programme selector knob
to the desired programme.
4.
Turn the temperature selector knob (if available) to the desired temperature.
5.
Turn the spin speed selector knob (if available) to the desired spin speed. If the spin speed “0” is
selected, the final spin is cancelled, but not intermediate spins. The programme ends with a drain cycle.
6.
Select the desired options as described in the Programme Chart.
Programme start
Switch on the washing machine- the indicator lights up.
Note
: If there is a power interruption or if the washing machine is disconnected during the cycle, the
programme will run again from the point where it was interrupted.
End of wash cycle
The programme selector knob is in the Stop position.
1.
Switch off the washing machine.
2.
Cancel the options.
3.
Turn the tap off.
4.
Wait for the lid to unlock (about 1 minute).
5.
Open the lid and the drum flaps and unload the machine.
Change the programme during the wash cycle
1.
Switch off the washing machine.
2.
Select the new programme.
3.
Start the programme by switching on the machine.
Pause/Interrupt a programme
If for any reason you wish to interrupt the programme for a certain time and continue it later:
1.
Switch off the machine.
2.
After the desired pause turn on the machine again.
Cancel programme
1.
Switch off the washing machine.
2.
Set the programme selector to “Drain”.
3.
Switch on the machine again to start the “Drain” programme.
IFU_Alpha_Sc1-mech_GB.fm Page 7 Wednesday, March 30, 2005 6:52 PM
Black process 45.0° 100.0 LPI
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis awv 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis awv 810 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis awv 810

Ignis awv 810 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info