615950
9
Zoom out
Zoom in
Previous page
1/34
Next page
NaviTEK NT 151844 Iss 2
User Guide Page 9
HOME Screen (with network cable connected to Active Remote)
When the tester is connected to a cable that is terminated with an Active Remote, Autotest
runs an advanced Wiremap test that can detect split pairs and faults by pin. The HOME screen
displays a bar indicating the progress of the test. Select this bar and press ENTER to display
the Wiremap result screen. When the test is complete the result is saved (depending on the
Auto Save setting).
Active Remote ID number
Overall Cable Length
Result saved indication
Indicates the name of the
last saved result
Wiremap test bar
Indicates progress and final
test result (Green = PASS, Red
= FAIL)
Highlight the bar using the
cursor keys then press ENTER
to display the Wiremap screen
Test Result
Pair Lengths
Indicates the lengths of the
individual cable pairs
Overall cable length
FAULT
Press F2(FAULT) to display a
list of faults found
Test Status:
Ready to test
Test in progress
Test Passed
Test Failed
RUN
Press F1 (RUN) to re- run the
Wiremap test without saving a
result
SETUP
Press F3(SETUP) to set the
Wiremap parameters according
to the type of cable tested
Active Remote pin numbers
Tester pin numbers
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks NaviTEK NT Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks NaviTEK NT Pro in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info