Manual Ideal Networks LanTEK III (page 76 of 110) (English)

615948

Zoom out

Zoom in

1/110

Chapter 8

Fiber testing (LWL) FiberTEK™ FDX

8.6. Set Autotest Pref

Autotest is the test mode used most often. The Autotest allows various presettings:

 Automatic saving

 Passed/Failed Rating

1. On start screen of Display handset (DH) select option Preferences.

2. Select option Autotest Pref.

3. Now enter the desired preferences in the opening screen.

NOTE:

Please note that Autotest Pref entered by you must be in compliance with the requirements

of the certification to be carried out.

8.6.1. Selection of Module (fiber type)

1. Use Arrow Keys to navigate on ready screen to "Fiber" display and confirm with

Enter.

2. Mark the wavelength in accordance with the fiber to be measured. If the loss

budget has already been determined, accept the preset value with Enter and

confirm with Enter.

Illustration 8.6.1. Select Wavelength

8.6.2. Determine Loss Budget

The loss budget influences the passed/failed thresholds for the loss measurements performed

with FiberTEK™ FDX. However, since the loss budget has no impact on the actual loss

measurement, this function is for informative purposes only. If the measured loss is smaller

or equal to the loss budget, a is displayed. If the loss exceeds the loss budget, the

following symbol appears: .

1. Use soft key to open Loss Budget Menu and to change limits according to

wavelength.

2. Use soft keys 850nm, 1300nm, 1310nm and 1550nm to select the according

wavelength to specify the loss budget.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks LanTEK III in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ideal Networks LanTEK III Manual

Product: