670304

Icom RS-BA1 Manual

29
Zoom out
Zoom in
Previous page
1/58
Next page
23
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
2
WHEN CONNECTING TO THE NETWORK THROUGH A PC
D
Adjust limitation setting
Remote stations can adjust the sound quality or audio
codec. Higher audio qualities will increase the amount
of data, which may overload the Base station’s PC,
and may influence other application on the PC.
The Server can limit the maximum level of the sound
quality or audio codec.
Remote stations cannot program higher values than
the values programmed at the Server.
q In the Base station’s Remote Utility, open the Radio
List screen.
How to open: Select the ‘Server Setting’ mode,
then click the [Radio List] tab.
w Select a radio, and then click [Properties] to display
the Radio Registration screen.
eConrmthatacheckmarkisintheAF - Use and
MOD-Use box.
r In the Sample Rates bar, limit the receive or trans-
mit audio sampling rate that Remote stations can
adjust.
Higher sampling rates will improve the audio qual-
ity. However, they also increase the amount of data,
which can cause voice delay or jumpiness, depend-
ing on the network condition.
Lower sampling rates will decrease the audio qual-
ity. However, they also decrease the amount of data.
t In the Codecs bar, limit the received or transmit
audio codec that Remote stations can adjust.
y In the Channels bar, select whether or not to allow
Remote stations to select stereo sound.
When you select “1 ch” (monaural), Remote sta-
tionscannotprogram“2ch”(stereo).
u Click [OK] to save the settings and close the screen.
q
Conrm
w
Adjust
D COM port and audio device settings
SettheCOMportthatisusedtotransmitCI-Vcom-
mands, or audio devices which are used for the audio
communication.
The explanation is based on when you connect a radio
to your PC using a USB cable.
After connecting and turning ON the radio, make the
following settings.
q In the Base station’s Remote Utility, open the Radio
List screen.
How to open: Select the ‘Server Setting’ mode,
then click the [Radio List] tab.
w Select a radio, and then click [Properties] to display
the Radio Registration screen.
e Click the COM Port/Audio Setting - Auto radio
button.
Radios that are connected to your PC using a USB
cable are displayed in the drop-down list.
Select an appropriate radio from the list, then the
COM port and audio device are automatically set.
r Click [OK] to save the settings and close the screen.
q
Click
w
Select
NOTE:
When you physically connect a radio to your PC
using other than a USB cable, select “Manual.”
In this case, you should manually select a COM port
to which the radio is connected in the COM Port
Number menu.
You should also select an appropriate audio device
to which the radio is connected in the AF Input De-
vice and MOD Output Device menus.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom RS-BA1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom RS-BA1 in the language / languages: English as an attachment in your email.

The manual is 14,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info