670304

Icom RS-BA1 Manual

28
Zoom out
Zoom in
Previous page
1/58
Next page
22
D Radio’s basic information setting
q In the Base station’s Remote Utility, open the Radio
List screen.
How to open: Select the ‘Server Setting’ mode,
then click the [Radio List] tab.
w Click [Add] to display the Radio Registration screen.
e Enter a name for the radio in the Radio Nameeld,
ofupto16characters.
r Click the CI-V box to make a check mark, then
entertheradio’sCI-VaddressintheAddresseld.
t Select the radio’s baud rate in the Baud Rate
menu.
y Click the Public box to make a check mark.
u Click [OK] to save the settings, and close the
screen.
q
Enter
w
Enter
e
Make a check mark
NOTE:
•BesuretoenterthesameCI-Vaddressandthe
baud rate that are programmed into the radio.
If the radio’s baud rate is set to “Auto,” select
“19200”intheBaud Rate menu.
See the radio’s instruction manual for details on
howtoconrmtheradio’sCI-Vaddressandbaud
rate, or how to change them.
•TonotallowRemotestationstoaccessaradio,
remove the check mark from the Public box.
D Radio’s Remote station registration
You can select which Remote stations are allowed
them to access the radio.
q In the Base station’s Remote Utility, open the Radio
List screen.
How to open: Select the ‘Server Setting’ mode,
then click the [Radio List] tab.
w Select a radio, then click [Properties] to display the
Radio Registration screen.
e Click [User Permission].
Click
r The Radio User Permission screen appears.
Select Remote stations in the Registered Users
list, then click [Permit].
 ConrmtheselectedRemotestationsaredisplayed
in the Permitted Users list, then click [OK] to close
the screen.
q
Select
e
Conrm
w
Click
r
Click
t Click [OK] in the Radio Registration screen to save
the settings and close the screen.
NOTE:
•ToremoveaRemotestationfromthePermitted
Users list, select it in the list, and then click [In-
hibit].
•WhenyounewlyregisteraRemotestation,you
can select radios in the User Registration screen
toallowtheRemotestationtousethem.(p.20)
2
WHEN CONNECTING TO THE NETWORK THROUGH A PC
■ Radio registration (Continued)
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom RS-BA1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom RS-BA1 in the language / languages: English as an attachment in your email.

The manual is 14,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info