30935
32
Zoom out
Zoom in
Previous page
1/47
Next page
Mounting the EX-2780 scanner unit
Location
The scanner unit is designed to be weatherproof and
completely watertight. Select a place for installation
which meets the following important conditions.
q The scanner unit must be near the boats center line
and have a good view in every direction. Be sure
there are no objects in the surrounding area which
will intercept the scanning beam.
w KEEP the scanner unit away from any smoke-
stacks. Smoke can damage the unit.
e When the boat is equipped with a radio directional
nder (RDF) system, keep the scanner unit at least
2 m (6.6 ft) away from any RDF antenna.
Radiation from the scanner unit can affect the measure-
ment data of RDF equipment.
r The unit should be placed as high as possible on
the boat to obtain best performance with maximum
range.
t If you install two or more radar in one boat, install
one above, and one below.
y The mounting surface must be parallel with the
boats waterline.
u If the height is insufcient to install the scanner unit,
build a special frame for installation.
Mounting
q Drill four (4) holes of 12 mm (
1
2 in) in diameter
using the template.
w If the mounting surface or platform is metal, apply
sealing compound around the holes to prevent cor-
rosion and to waterproof the unit.
e Fix the scanner unit to the selected position with
bolts of 10 mm (
3
8 in) in diameter, with flat and
spring washers. The supplied bolts are two lengths:
25 mm (1 in) or 50 mm (2 in).
CAUTION: SECURE the four bolts tightly.
Ships bow direction
190 (7
15
32)
399 (17
23
32)
381 (15)
28
9
INSTALLATION AND CONNECTIONS
Ships bow direction
302 (11
29
32)
248 (9
3
4)
1200 (47
1
4)
20.5 (
13
16)
R5.5 (
7
32
)
11 (
7
16)
262 (10
5
16)
281 (11
1
16) 98 (3
7
8)
152 (5
31
32)
190 (7
15
32)
WARNING: BE SURE [POWER]/[ ] is
OFF whenever you are working with the scanner
unit.
MR-1000R2_T2.qxd 04.2.24 10:22 Page 28
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom MR1000TII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom MR1000TII in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info