30935
18
Zoom out
Zoom in
Previous page
1/47
Next page
5
DISTANCE AND DIRECTION MEASUREMENTS
14
Distance measurement
Two measurement procedures are available with this
radar. Operating them separately or jointly is possible.
The distance unit, nautical miles (NM) or kilometers
(KM) is selected in the FUNCTION menu (p. 6).
D Using the xed rings
q Push [MENU]/[ ] several times to call up the
FUNCTION menu.
w Push [Ú] until the RING section becomes high-
lighted.
e Push [
] to select RING function ON and display
the xed ring.
The interval range appears on the right of the screen
range readout.
The ring range is xed depending on the screen range.
(See below.)
r Push [MENU]/[ ] several times to exit the menu.
t To clear the xed rings, push [
] to select OFF in
step e above.
D Using the variable range marker
q
Push [EBL1 (VRM1)]/[ ] to display the
VRM1 and EBL1; then, push [Ù Ú] to set the marker.
The range between the ship and the target is indicated
in the VRM readouts.
w
Push [EBL2 (VRM2)]/[ ] to display the
VRM2 and EBL2; then, push [Ù Ú] to set the marker.
The range between the ship and the target is indicated
in the VRM readouts.
When the VRM1 and EBL1 are displayed, the center of
VRM2 appears at the intersection point of the VRM1 and
EBL1.
The VRM2 disappears when [EBL1 (VRM1)] is pushed.
e Push [EBL1 (VRM1)]/[ ] to exit the
menu display.
Range (nm)
Ring (nm)
1 1.5 2 3 4 6 8 12 16 24 32 36 48*
1
8
1
4
1
2
3
4
25534646464646466
112 2448 86
1
20
1
20
1
10
1
4
1
4
1
4
1
2
1
2
NOTE: When the screen is shifted, the number of rings may differ.
*Available for the MR-1000TII only.
1
(0.25)
T.VECT
0.900NM
NM
CURS
SOG 0.0KT
H UP
014.6˚T
HDG
IR
ES
EBL1
EBL2
W
PT
VRM1
VRM2
CURS 34 ˚ 37.72N
13 5˚ 34.42E
Fixed ring
Ring range readout
TYPE
RING
VRM1
VRM2
DESCRIPTION
Displays xed rings.
Suitable for rough estimations from your
own ship to any target.
Displays a variable range marker and ac-
tivated by the [Ù Ú] for the range marker
selector.
Suitable for accurate measurements from
your own ship to a target.
Normally functions the same as VRM1.
When the VRM1 and EBL1 selects a tar-
get, the center of VRM2 appears at the
intersection point.
Suitable for accurate measurements from
target to target.
MR-1000R2_T2.qxd 04.2.24 10:22 Page 14
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom MR1000TII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom MR1000TII in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info