30935

Icom MR1000TII Manual

17
Zoom out
Zoom in
Previous page
1/47
Next page
13
4
BASIC OPERATION
■ Ship speed indication
When the ship speed data with NMEA 0183 format is
applied, the radar can display the ship speed. Knots
(KT) or kilometers/hour (KM/h) are automatically se-
lected in the normal screen (p. 4) by selecting nautical
miles (NM) or kilometers (KM) respectively.
q Push [MENU]/[ ] several times to call up the
FUNCTION menu.
w Push [Ú] until the “DIST UNIT” section becomes
highlighted.
e Push [Ω ≈] to turn the ship speed indication to NM
or KM.
r Push [MENU]/[ ] several times to exit the menu
display or push [Ú] once to proceed to the position
display setting.
■ Position indication
When latitude/longitude data with NMEA 0183 format
is applied, the radar can display the latitude and longi-
tude of your ship’s or cursor position in the bottom of
the display. (To display the CURSOR position, bearing
data is necessary.) (p. 39)
q Push [MENU]/[ ] several times to call up the
FUNCTION menu.
w Push [Ú] until “POSN DISP” section becomes high-
lighted.
e Push [Ω ≈] to select the ship position or cursor po-
sition.
r Push [MENU] several times to exit the menu.
■ Waypoint indication
When waypoint data received from navigation equip-
ment with NMEA 0183 format is applied, the radar can
display the waypoint. To display the waypoint marker,
bearing data is necessary. (p. 39)
q Push [MENU]/[ ] several times to call up the
FUNCTION menu.
w Push [Ú] until the “WPT” section becomes high-
lighted.
e Push [Ω ≈] to turn the waypoint indication ON or
OFF.
r Push [MENU]/[ ] several times to exit the menu
display.
■ Long pulse function
To magnify the blips for easier viewing of small targets,
the long pulse and echo stretch (p. 11) functions are
available. When the long pulse is used in the
3
⁄
4 to
2 NM range, this function magnifies target echoes to
the backward direction of the target.
• Pulse selection
q Push [MENU]/[ ] several times to call up the
VIDEO menu. (p. 6)
w Push [Ú] until the “PULSE” section becomes high-
lighted.
e Push [≈] to select the long pulse.
r Long Pulse indication “” appears in the upper left
of the screen.
t Push [MENU]/[ ] several times to exit the menu.
■ Bearing setting
The radar bearing interface accepts NMEA, N+1 or
AUX data format and the bearing can use a magnetic
or true north type. When a true north type bearing is
used, the variation from magnetic north, etc., can be
adjusted on 0.1˚ steps.
D Setting the bearing type
q Push [MENU]/[ ] several times to call up the
FUNCTION menu.
w Push [Ú] until the “BRG” section becomes high-
lighted.
e Push [Ω ≈] to select magnetic or true north type.
• All displayed bearing readouts show the selected bear-
ing type.
D Setting the magnetic variation
q Push [MENU]/[ ] several times to call up the INT.
SETTING menu.
w Push [Ú] until the “MAG VAR” sections becomes
highlighted.
e Push [Ω ≈] to select an AUTO* or MANUAL varia-
tion.
r When a MANUAL variation is selected, push [Ú],
then push [Ω ≈] to set the bearing variation.
t Push [MENU]/[ ] to exit the menu display or
push [Ú] once to proceed to the bearing input set-
ting.
*NOTE: NMEA data is required for auto variation. NEVER
select “AUTO” variation without NMEA data, incorrect varia-
tion data may entered.
NOTE: Turn SP (Short Pulse) this function during
normal operation. This function reduces the target
distance resolution. (p. 23)
MR-1000R2_T2.qxd 04.2.24 10:22 Page 13
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom MR1000TII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom MR1000TII in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info