30933
21
Zoom out
Zoom in
Previous page
1/47
Next page
The unit has an alarm function to protect your ship from collisions. If other ships or islands, etc. come into the pre-
programmed alarm zone, the function alerts you with an alarm. You can set the desired range and bearing for an
alarm zone. While the alarm function is activated, the power save function turns the CRT OFF until an alarm is
given, to conserve power.
Alarm zone setting
D Setting and using the alarm function
q Push [+]/[ ] or []/[ ] to select the desired
range.
w Push [ Ù Ú] to set the cursor to the starting
point of the alarm zone.
e Push and hold [ALM]/[ ] for 1 sec. to enter the
alarm zone setting.
The starting zone appears on the screen. (Fig. 1)
r Push [Ω≈] to adjust an angle and push [Ù Ú] to
set the distance of the alarm zone.
The selected alarm zone appears.
t Push [ALM]/[ ] to x the alarm zone and activate
the alarm function.
•“ALM appears on the bottom of the screen.
The selected alarm zone remains.
y If a target comes into or goes out of the alarm zone,
an alarm beep is emitted.
Push [ALM]/[ ] to cancel the alarm signal and func-
tion .
u To deactivate the alarm function, push [ALM]/[ ].
•“ALM and alarm zone disappear from the screen.
i To activate the alarm function again with the same
programmed zone, push [ALM]/[ ].
ALM and pre-programmed alarm zone appears. (Fig. 2)
Using the function with power saver
To activate the power save function, push and hold [TX
(SAVE)]/[ ] for 1 sec. while the alarm function
is turned ON.
The CRT display turns OFF.
When a target comes into the alarm zone, an alarm sig-
nal is emitted, the CRT display turns ON and the power
save function is cancelled.
Zone alarm setting
Zone alarm beep is emitted when the target comes
into the zone, or the target goes out of the zone. (p. 6)
q Push [MENU]/[ ] several times to call up the
FUNCTION menu.
w Push [Ú] until the ZONE ALARM section becomes
highlighted.
e Push [Ω ≈] to select IN or OUT
IN : Alarm sounds when the target comes into the
zone. (see Fig. 3)
OUT: Alarm sounds when the target goes out of the
zone.
Alarm sounds when the target
comes into the zone.
Alarm zone
Fig. 3
Target (other ship, etc.)
3/4
(0.25)
TVECT
3M
0189NM
NM
CURS\
SOG177
KT
H UP
0525
˚T
HDG2739
˚T
IR
ES
EBL1
EBL2
WPT
VRM1
VRM2
CURS 34
˚
3772N 135
˚
3442E
GYRO
GPS
ALM
3/4
(0.25)
TVECT
3M
0397NM
NM
CURS\
SOG177
KT
H UP
3143
˚T
HDG2739
˚T
IR
ES
EBL1
EBL2
WPT
VRM1
VRM2
CURS 34
˚
3772N 135
˚
3442E
GYRO
GPS
Push
[ Ù Ú]
“ALM”
appears
Fig. 1
Fig. 2
ALARM FUNCTION
6
17
MR-1000R2_T2.qxd 04.2.24 10:22 Page 17
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom MR1000RII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom MR1000RII in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info