30933
20
Zoom out
Zoom in
Previous page
1/47
Next page
Advanced measurements
Using both Electronic Bearing Lines (EBL) and both
Variable Range Markers (VRM), the following ad-
vanced measurements can be made:
D Measuring the distance and direction between 2 targets
q Push [Ù Ú Ω ≈] to move the cursor on the desired
target.
w Push [EBL1 (VRM1)]/[ ] to display the
EBL1 and VRM1.
Push [Ω ≈] to rotate the electronic bearing line.
Push [Ù Ú] to increase or decrease the variable range
marker ring size.
e Push [EBL2 (VRM2)]/[ ] to display the
EBL2 and VRM2.
The intersection of the EBL1 and VRM1 becomes the
center of the EBL2 and VRM2.
r Push [Ù Ú ≈] to move the cursor on the other
target.
Push [Ω ≈] to rotate the electronic bearing line.
Push [Ù Ú] to increase or decrease the variable range
marker ring size.
t The VRM2 readout shows the distance between the
two targets. The EBL2 readout shows the direction
from one target to the other.
D Measuring the relative speed and course of a target
q Push [TRAILS]/[ ] (p. 12) ON; then wait until
the trail time count up reaches to the TRAIL TIME.
w Set VRM1 and EBL1 to a previously plotted target
as described above.
e Set VRM2 and EBL2 to the current plotted position
of the same target as described as above.
r The VRM2 readout is a measure of target move-
ment which can be converted into relative target
speed.
For example, when a 6 min. trail time is selected, multi-
plying the distance by ten gives the relative average
speed of the target.
If your ship is stationary during the plotting time, the
converted speed and direction become absolute.
The converted speed unit is knots or kilometers/hour
when the selected unit in the FUNCTION menu is nauti-
cal miles (NM) or kilometers (KM), respectively.
t The EBL2 readout shows the course direction of the
target.
Measuring the distance and course from a waypoint
q Display a waypoint. (see p. 13)
w Set VRM1 and EBL1 to the displayed waypoint tar-
gets as described above.
e Set VRM2 and EBL2 to a target (e.g. the next way-
point) as described above.
r The VRM2 readout shows the distance to the target
from the waypoint.
The distance unit can be selected as nautical miles (NM)
or kilometers (KM) in the FUNCTION menu.
t The EBL2 readout shows the direction to the target
from the waypoint.
3/4
TVECT
6M
1141NMNM
CURS\
SOG
KT
H UP
3171
˚M
HDG
IR
ES
EBL1 3211
˚T
EBL2 1714
˚T
WPT
VRM1 0401NM
VRM2 0184NM
POSN
VRM2
EBL2
EBL1
VRM1
3/4
MTUNE
TVECT
3M
1141NMNM
CURS\
SOG
km/h
H UP
3171
˚M
HDG
IR
ES
EBL1 3211
˚M
EBL2 0890
˚T
WPT
VRM1 0852NM
VRM20814NM
POSN
ALM
GYRO
GPS
EBL2
EBL1
VRM2
VRM1
5
DISTANCE AND DIRECTION MEASUREMENTS
16
MR-1000R2_T2.qxd 04.2.24 10:22 Page 16
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom MR1000RII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom MR1000RII in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info