Manual Icom iPW1 (page 13 of 20) (English)

670299

Zoom out

Zoom in

1/20

INSTALLATION AND CONNECTIONS

The control section of the linear ampliﬁer can be sep-

arated from the main body, doubling as a remote con-

troller. It can be placed on the exciter or in another

convenient place.

q Disconnect the AC power cable.

w Remove 8 screws from the sides of the linear am-

pliﬁer, then lift up the top cover.

e Unplug the control cable from J3 on the MAIN unit.

r Remove 2 screws from the front panel of the linear

ampliﬁer, then detach the remote controller. (Fig.

1) Attach the dummy panel onto the space left by

the controller using the 2 screws.

t Remove 5 screws from the rear panel of the re-

mote controller, then remove the rear panel.

y Replace the control cable with the supplied sepa-

ration cable through the cable hole. Use the

shorter end (from the bushing) to connect to the

remote controller.

u Remove 2 screws from the cable hole cover on the

linear amplifier rear panel. Insert the separation

cable into the cable hole. Keep the hole cover and

screws for future use.

i Plug the other longer end (from the bushing) of the

separation cable into J10 on the JACK unit through

the cable hole. Connect the grounding wire as

shown below. Connect the control cable to J11.

o Plug the other end of the control cable into J3 on

the MAIN unit. (Fig. 2)

!0 Replace the top cover and 8 screws.

■ Separating the remote controller

Control cable

Separation cable

CONTROLLER

Longer end

(from the bushing)

Control cable (step e)

(Fig. 2)

Control cable

(step i)

(Fig. 1)

JACK unit

MAIN unit

J11

Control cable

Separation cable

JACK unit

To J3

(MAIN)

J10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom iPW1 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom iPW1 Manual

Product: