670299

Icom iPW1 Manual

7
Zoom out
Zoom in
Previous page
1/20
Next page
4
1
PANEL DESCRIPTION
D ACC-1 SOCKET
D ACC-2 SOCKET (w/[EXCITER] is “1”)
The following descriptions are applied when the
[EXCITER] switch is set to “1” (default). When [EX-
CITER] is set to “1&2,” [ACC-2] functions the same
as [ACC-1] above for the 2nd exciter.
ACC-1 PIN NO.
PIN NAME
DESCRIPTION SPECIFICATIONS
1 8 V
Regulated reference 8 V DC input
for band control.
Input voltage : 8 V ±0.3 V
Input current : Less than 10 mA
2 GND Connects to ground.
3 SEND
Input/output pin.
Goes to ground when transmitting.
When grounded, transmits.
Ground level : –0.5 V to 0.8 V
Output current : Less than 20 mA
Input current : Less than 200 mA
4 BAND
Band voltage input.
(Varies with amateur band)
Input voltage : 0 to 8.0 V
5 ALC ALC voltage output.
Control voltage : –10 to 0 V
Output impedance : 10 kΩ
6 NC No connection.
7 13.8 V 13.8 V DC input terminal. Input current : Less than 1 A
Rear panel
view
1
2
3
4
5
6
7
ACC-2 PIN NO.
PIN NAME
DESCRIPTION SPECIFICATIONS
1 8 V
Regulated reference 8 V DC output
from the [ACC-1] socket.
Output voltage : 8 V ±0.3 V
Output current : Less than 10 mA
2 GND Connects to ground.
3 SEND
Input/output pin.
Goes to ground when transmitting.
When grounded, transmits.
Ground level : –0.5 V to 0.8 V
Output current : Less than 20 mA
Input current : Less than 200 mA
4 BAND
Band voltage output from the
[ACC-1] socket.
(Varies with amateur band)
Output voltage : 0 to 8.0 V
5 ALC ALC voltage output.
Control voltage : –10 to 0 V
Output impedance : 10 kΩ
6 NC No connection.
7 13.8 V
13.8 V DC output terminal from the
[ACC-1] socket.
Output current : Less than 1 A
Rear panel
view
1
2
3
4
5
6
7
!0 EXCITER SELECTOR [EXCITER] (pgs. 7–9)
Sets the connected exciter number.
- Select [1] when 1 exciter is connected. [ACC-2] outputs
the received [ACC-1] signal to another Icom option such
as the EX-627
AUTOMATIC ANTENNA SELECTOR.
- Select [1&2] when 2 exciters or 1 exciter with 2 speci-
fied band antenna connectors is connected.
!1 INPUT ANTENNA CONNECTORS
[INPUT1]/[INPUT2] (p. 6)
Accept a 50 Ω antenna with a PL-259 connector.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom iPW1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom iPW1 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info