5-4
5
RECEIVE FUNCTIONS
DD
Peak marker function
The peak marker function can display the frequencies
of several peaks in order.
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [F-1•SCOPE] to select the scope screen.
• The spectrum scope shows the peak level holding func-
tion. Peak levels are displayed in the background of the
current spectrum in a different color until the receive fre-
quency changes. This can be deactivated and the
waveform color can be set in scope set mode. (p. 5-7)
e Push [F-6•CENT/FIX] to select center or fixed
mode.
r Push [F-7•PEAK] once.
• Multifunction switch guide changes to the peak selec-
tion guide.
t Push [PEAK] to place the marker on the first peak.
• Push [NEXT level] to search for the next peak level.
• Push [NEXTΩ] to search for the next peak level of lower
frequency.
• Push [NEXT≈] to search for the next peak level of
higher frequency.
• Push and hold [➔RX] to overwrite the peak level fre-
quency as the new center frequency.
• Push [OFF] to turn OFF the maker.
•“<<” or “>>” appears when the marker is out of range.
y Push [EXIT/SET] to return to the previous screen.
