670434
70
Zoom out
Zoom in
Previous page
1/96
Next page
11
SET MODE
11-3
SPEECH > SPEECH Output for Ext connectors
(Default: All)
Selects the announcement condition to output from
the external terminals (USB, LAN, AF/IF and EXT-SP).
OFF: The announcement is not output.
Push/Touch: The announcement is output when you
push
, or touch the screen.
All: The announcement is output when you
push or touch the screen, or when
a signal is received during a scan.
L The announcement is not output if [S-Level SPEECH],
[MODE SPEECH] or [SCAN SPEECH] is set to “OFF.”
SPEECH >
SPEECH Output for Recording
(Default: All)
Selects the announcement recorded condition.
OFF: The announcement is not recorded.
Push/Touch: The announcement is recorded when
you push
, or touch the screen.
All: The announcement is recorded when
you push or touch the screen, or
when a signal is received during a scan.
L The announcement is not recorded if [S-Level SPEECH],
[MODE SPEECH] or [SCAN SPEECH] is set to “OFF.”
SPEECH >
SPEECH Level (Default: 50%)
Sets the announcement output level.
Range: 0 ~ 100%
[SPEECH/LOCK] Switch (Default: SPEECH/LOCK)
Selects the
key action.
• SPEECH/LOCK: Pushing turns ON the Speech
function.
Holding down turns the Lock
function ON or OFF.
• LOCK/SPEECH: Pushing turns the Lock
function ON or OFF.
Holding down turns ON the
Speech function.
[P.LOCK] Switch (Default: ALL)
Selects the action of the
key.
L and are not locked.
• ALL: All controls are disabled.
KEY:
All controls except and
are disabled.
L When you hold down for 1 second, the display
backlight is turned OFF.
L
When “KEY” is selected and while the Panel Lock is
activated, rotating
or turns ON the display
backlight.
MAIN DIAL Auto TS (Default: High)
Sets the Auto Tuning Step function for
MAIN DIAL
.
When rapidly rotating
MAIN DIAL
, the tuning step
automatically changes according to the rotation speed.
OFF: Auto tuning step is turned OFF.
LOW: Approximately 2 times faster.
HIGH: Approximately 5 times faster when the tuning
step is set to 1 kHz or smaller steps.
Approximately 2 times faster when the tuning
step is set to 5 kHz or larger steps.
AFC Limit (Default: ON)
Selects whether or not to limit the frequency shift
range for the AFC function.
OFF: Does not limit the frequency shift range.
• ON: Limits the frequency shift range according to
the table below.
Receive mode Filter width AFC range limit
DIGITAL 5 kHz
±3.5 kHz
10 kHz
±7 kHz
FM/DIGITAL 7 kHz
±5 kHz
15 kHz
±10 kHz
FM 50 kHz
±25 kHz
WFM 200 kHz
±100 kHz
[NOTCH] Switch (AM) (Default: Auto/Manual)
[NOTCH] Switch (SSB) (Default: Auto/Manual)
Selects the Notch function type in the SSB or AM mode.
Auto: Only the Auto notch lter (AN).
• Manual: Only the Manual notch lter (MN).
Auto/Manual: Both the Auto and Manual notch lters.
SSB/CW Synchronous Tuning (Default: OFF)
Turns the Displayed Frequency Shift function ON or OFF.
This function automatically shifts the frequency to
match the CW pitch when the operating mode is
toggled between SSB and CW.
OFF:
Stays on the frequency even when the operating
mode is toggled between SSB and CW.
ON: Shifts the frequency when the operating mode
is
toggled
between SSB and CW, to keep
receiving the signal.
CW Normal Side (Default: LSB)
Selects the carrier point in the CW normal mode.
• LSB: The LSB side.
• USB: The USB side.
Screen Capture [POWER] Switch (Default: OFF)
Assigns the Screen Capture function to
.
OFF:
does not act as the Screen Capture key.
ON: acts as the Screen Capture key.
Function (Continued)
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-R8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-R8600 in the language / languages: English as an attachment in your email.

The manual is 22,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info